#pragma once

#include <math.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>

#ifdef __cplusplus /* Use C linkage when compiling this C library header from C++ */
extern "C" {
#endif

#ifndef M_PI
#define M_PI 3.14159265358979323846
#endif

////////////////////////////////////////////////////////////////////////////////
/// Enum Types
////////////////////////////////////////////////////////////////////////////////

/**
 * API call status codes
 */
typedef enum HebiStatusCode {
  HebiStatusSuccess = 0, ///Success; no failures occurred
  HebiStatusInvalidArgument = 1, ///An invalid argument was supplied to the routine (e.g. null pointer)
  HebiStatusBufferTooSmall = 2, ///A buffer supplied to the routine was too small (normally determined by a size parameter)
  HebiStatusValueNotSet = 3, ///Returned when an accessor function attempts to retrieve a field which is not set
  HebiStatusFailure = 4, ///Generic code for failure; this is generally used for an internal or unknown failure
  HebiStatusArgumentOutOfRange = 5 ///Failure caused by an argument supplied to the routine that is out of range (e.g. a negative integer when only a positive integer is valid)
} HebiStatusCode;

typedef enum HebiLogFileEntryType {
  HebiLogFileEntryTypeUnknown = 0,
  HebiLogFileEntryTypeFeedback = 1,
  HebiLogFileEntryTypeInfo = 2,
  HebiLogFileEntryTypeUserState = 3,
} HebiLogFileEntryType;

/**
 * Trajectory time estimation methods
 */
typedef enum HebiTimeEstimationMethod {
  HebiTimeEstimationNFabian,
  HebiTimeEstimationVelocityRamp,
} HebiTimeEstimationMethod;

typedef struct {
  double magic_fabian_constant;
} HebiTimeEstimationNFabianParams;

typedef struct {
  HebiTimeEstimationMethod method;
  union {
    HebiTimeEstimationNFabianParams n_fabian_params;
    // HebiTimeEstimationVelocityRampParams velocity_ramp_params;  // Empty struct different size in C/C++, so we don't include a struct for it
  } params;
} HebiTimeEstimationParams;

/**
 * AR Quality codes
 */
typedef enum HebiArQuality {
  HebiArQualityNotAvailable, ///Camera position tracking is not available
  HebiArQualityLimitedUnknown, ///Tracking is available albeit suboptimal for an unknown reason
  HebiArQualityLimitedInitializing, ///The AR session has not yet gathered enough camera or motion data to provide tracking information
  HebiArQualityLimitedRelocalizing, ///The AR session is attempting to resume after an interruption
  HebiArQualityLimitedExcessiveMotion, ///The device is moving too fast for accurate image-based position tracking
  HebiArQualityLimitedInsufficientFeatures, ///The scene visible to the camera does not contain enough distinguishable features for image-based position tracking
  HebiArQualityNormal ///Camera position tracking is providing optimal results
} HebiArQuality;

typedef enum HebiIoBankPinResidentType {
  HebiIoBankPinResidentTypeNone, // Io pin should be interpreted empty
  HebiIoBankPinResidentTypeInteger, // Io pin should be interpreted as an integer (`int64_t`)
  HebiIoBankPinResidentTypeFloat // Io pin should be interpreted as a float (`float`)
} HebiIoBankPinResidentType;

////////////////////////////////////////////////////////////////////////////////
/// Command Enums
////////////////////////////////////////////////////////////////////////////////

typedef enum HebiCommandFloatField {
  HebiCommandFloatVelocity, /// Velocity of the module output (post-spring).
  HebiCommandFloatEffort, /// Effort at the module output; units vary (e.g., N * m for rotational joints and N for linear stages).
  HebiCommandFloatPositionKp, /// Proportional PID gain for position
  HebiCommandFloatPositionKi, /// Integral PID gain for position
  HebiCommandFloatPositionKd, /// Derivative PID gain for position
  HebiCommandFloatPositionFeedForward, /// Feed forward term for position (this term is multiplied by the target and added to the output).
  HebiCommandFloatPositionDeadZone, /// Error values within +/- this value from zero are treated as zero (in terms of computed proportional output, input to numerical derivative, and accumulated integral error).
  HebiCommandFloatPositionIClamp, /// Maximum allowed value for the output of the integral component of the PID loop; the integrated error is not allowed to exceed value that will generate this number.
  HebiCommandFloatPositionPunch, /// Constant offset to the position PID output outside of the deadzone; it is added when the error is positive and subtracted when it is negative.
  HebiCommandFloatPositionMinTarget, /// Minimum allowed value for input to the PID controller
  HebiCommandFloatPositionMaxTarget, /// Maximum allowed value for input to the PID controller
  HebiCommandFloatPositionTargetLowpass, /// A simple lowpass filter applied to the target set point; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiCommandFloatPositionMinOutput, /// Output from the PID controller is limited to a minimum of this value.
  HebiCommandFloatPositionMaxOutput, /// Output from the PID controller is limited to a maximum of this value.
  HebiCommandFloatPositionOutputLowpass, /// A simple lowpass filter applied to the controller output; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiCommandFloatVelocityKp, /// Proportional PID gain for velocity
  HebiCommandFloatVelocityKi, /// Integral PID gain for velocity
  HebiCommandFloatVelocityKd, /// Derivative PID gain for velocity
  HebiCommandFloatVelocityFeedForward, /// Feed forward term for velocity (this term is multiplied by the target and added to the output).
  HebiCommandFloatVelocityDeadZone, /// Error values within +/- this value from zero are treated as zero (in terms of computed proportional output, input to numerical derivative, and accumulated integral error).
  HebiCommandFloatVelocityIClamp, /// Maximum allowed value for the output of the integral component of the PID loop; the integrated error is not allowed to exceed value that will generate this number.
  HebiCommandFloatVelocityPunch, /// Constant offset to the velocity PID output outside of the deadzone; it is added when the error is positive and subtracted when it is negative.
  HebiCommandFloatVelocityMinTarget, /// Minimum allowed value for input to the PID controller
  HebiCommandFloatVelocityMaxTarget, /// Maximum allowed value for input to the PID controller
  HebiCommandFloatVelocityTargetLowpass, /// A simple lowpass filter applied to the target set point; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiCommandFloatVelocityMinOutput, /// Output from the PID controller is limited to a minimum of this value.
  HebiCommandFloatVelocityMaxOutput, /// Output from the PID controller is limited to a maximum of this value.
  HebiCommandFloatVelocityOutputLowpass, /// A simple lowpass filter applied to the controller output; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiCommandFloatEffortKp, /// Proportional PID gain for effort
  HebiCommandFloatEffortKi, /// Integral PID gain for effort
  HebiCommandFloatEffortKd, /// Derivative PID gain for effort
  HebiCommandFloatEffortFeedForward, /// Feed forward term for effort (this term is multiplied by the target and added to the output).
  HebiCommandFloatEffortDeadZone, /// Error values within +/- this value from zero are treated as zero (in terms of computed proportional output, input to numerical derivative, and accumulated integral error).
  HebiCommandFloatEffortIClamp, /// Maximum allowed value for the output of the integral component of the PID loop; the integrated error is not allowed to exceed value that will generate this number.
  HebiCommandFloatEffortPunch, /// Constant offset to the effort PID output outside of the deadzone; it is added when the error is positive and subtracted when it is negative.
  HebiCommandFloatEffortMinTarget, /// Minimum allowed value for input to the PID controller
  HebiCommandFloatEffortMaxTarget, /// Maximum allowed value for input to the PID controller
  HebiCommandFloatEffortTargetLowpass, /// A simple lowpass filter applied to the target set point; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiCommandFloatEffortMinOutput, /// Output from the PID controller is limited to a minimum of this value.
  HebiCommandFloatEffortMaxOutput, /// Output from the PID controller is limited to a maximum of this value.
  HebiCommandFloatEffortOutputLowpass, /// A simple lowpass filter applied to the controller output; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiCommandFloatSpringConstant, /// The spring constant of the module.
  HebiCommandFloatReferencePosition, /// Set the internal encoder reference offset so that the current position matches the given reference command
  HebiCommandFloatReferenceEffort, /// Set the internal effort reference offset so that the current effort matches the given reference command
  HebiCommandFloatVelocityLimitMin, /// The firmware safety limit for the minimum allowed velocity.
  HebiCommandFloatVelocityLimitMax, /// The firmware safety limit for the maximum allowed velocity.
  HebiCommandFloatEffortLimitMin, /// The firmware safety limit for the minimum allowed effort.
  HebiCommandFloatEffortLimitMax, /// The firmware safety limit for the maximum allowed effort.
  HebiCommandFloatMotorFocId, /// The i_d feedback term of the field-oriented control loop running on the motor.
  HebiCommandFloatMotorFocIq, /// The i_q feedback term of the field-oriented control loop running on the motor.
  HebiCommandFloatUserSettingsFloat1, /// Sets the value of the user setting float field "1"
  HebiCommandFloatUserSettingsFloat2, /// Sets the value of the user setting float field "2"
  HebiCommandFloatUserSettingsFloat3, /// Sets the value of the user setting float field "3"
  HebiCommandFloatUserSettingsFloat4, /// Sets the value of the user setting float field "4"
  HebiCommandFloatUserSettingsFloat5, /// Sets the value of the user setting float field "5"
  HebiCommandFloatUserSettingsFloat6, /// Sets the value of the user setting float field "6"
  HebiCommandFloatUserSettingsFloat7, /// Sets the value of the user setting float field "7"
  HebiCommandFloatUserSettingsFloat8, /// Sets the value of the user setting float field "8"
  HebiCommandFloatOffsetReferencePosition, /// Offset the internal encoder reference offset so that the current position changes by the given reference offset command
} HebiCommandFloatField;

typedef enum HebiCommandHighResAngleField {
  HebiCommandHighResAnglePosition, /// Position of the module output (post-spring).
  HebiCommandHighResAnglePositionLimitMin, /// The firmware safety limit for the minimum allowed position.
  HebiCommandHighResAnglePositionLimitMax, /// The firmware safety limit for the maximum allowed position.
} HebiCommandHighResAngleField;

typedef enum HebiCommandNumberedFloatField {
  HebiCommandNumberedFloatDebug, /// Values for internal debug functions (channel 1-9 available).
} HebiCommandNumberedFloatField;

typedef enum HebiCommandUInt64Field {
  HebiCommandUInt64IpAddress, /// Static IP address to set on the module (or 0 for DHCP)
  HebiCommandUInt64SubnetMask, /// Subnet mask to set on the module (in conjunction with a static IP)
} HebiCommandUInt64Field;

typedef enum HebiCommandVector3fField {
  HebiCommandVector3fForce, /// Cartesian force data, such as to a haptic device
  HebiCommandVector3fTorque, /// Cartesian torque data, such as to a haptic device
} HebiCommandVector3fField;

typedef enum HebiCommandBoolField {
  HebiCommandBoolPositionDOnError, /// Controls whether the Kd term uses the "derivative of error" or "derivative of measurement." When the setpoints have step inputs or are noisy, setting this to @c false can eliminate corresponding spikes or noise in the output.
  HebiCommandBoolVelocityDOnError, /// Controls whether the Kd term uses the "derivative of error" or "derivative of measurement." When the setpoints have step inputs or are noisy, setting this to @c false can eliminate corresponding spikes or noise in the output.
  HebiCommandBoolEffortDOnError, /// Controls whether the Kd term uses the "derivative of error" or "derivative of measurement." When the setpoints have step inputs or are noisy, setting this to @c false can eliminate corresponding spikes or noise in the output.
  HebiCommandBoolAccelIncludesGravity, /// Whether to include acceleration due to gravity in acceleration feedback.
} HebiCommandBoolField;

typedef enum HebiCommandStringField {
  HebiCommandStringName, /// The name for this module. The string must be null-terminated and less than 21 characters.
  HebiCommandStringFamily, /// The family for this module. The string must be null-terminated and less than 21 characters.
  HebiCommandStringAppendLog, /// Appends to the current log message on the module.
  HebiCommandStringUserSettingsBytes1, /// Sets the value of the user setting bytes field "1"
  HebiCommandStringUserSettingsBytes2, /// Sets the value of the user setting bytes field "2"
  HebiCommandStringUserSettingsBytes3, /// Sets the value of the user setting bytes field "3"
  HebiCommandStringUserSettingsBytes4, /// Sets the value of the user setting bytes field "4"
  HebiCommandStringUserSettingsBytes5, /// Sets the value of the user setting bytes field "5"
  HebiCommandStringUserSettingsBytes6, /// Sets the value of the user setting bytes field "6"
  HebiCommandStringUserSettingsBytes7, /// Sets the value of the user setting bytes field "7"
  HebiCommandStringUserSettingsBytes8, /// Sets the value of the user setting bytes field "8"
} HebiCommandStringField;

typedef enum HebiCommandFlagField {
  HebiCommandFlagSaveCurrentSettings, /// Indicates if the module should save the current values of all of its settings.
  HebiCommandFlagReset, /// Restart the module.
  HebiCommandFlagBoot, /// Boot the module from bootloader into application.
  HebiCommandFlagStopBoot, /// Stop the module from automatically booting into application.
  HebiCommandFlagClearLog, /// Clears the log message on the module.
} HebiCommandFlagField;

typedef enum HebiCommandEnumField {
  HebiCommandEnumControlStrategy, /// How the position, velocity, and effort PID loops are connected in order to control motor PWM.
  HebiCommandEnumMstopStrategy, /// The motion stop strategy for the actuator
  HebiCommandEnumMinPositionLimitStrategy, /// The position limit strategy (at the minimum position) for the actuator
  HebiCommandEnumMaxPositionLimitStrategy, /// The position limit strategy (at the maximum position) for the actuator
} HebiCommandEnumField;

typedef enum HebiCommandIoPinBank {
  HebiCommandIoBankA, /// I/O pin bank a (pins 1-8 available)
  HebiCommandIoBankB, /// I/O pin bank b (pins 1-8 available)
  HebiCommandIoBankC, /// I/O pin bank c (pins 1-8 available)
  HebiCommandIoBankD, /// I/O pin bank d (pins 1-8 available)
  HebiCommandIoBankE, /// I/O pin bank e (pins 1-8 available)
  HebiCommandIoBankF, /// I/O pin bank f (pins 1-8 available)
} HebiCommandIoPinBank;

typedef enum HebiCommandLedField {
  HebiCommandLedLed, /// The module's LED.
} HebiCommandLedField;


////////////////////////////////////////////////////////////////////////////////
/// Feedback Enums
////////////////////////////////////////////////////////////////////////////////

typedef enum HebiFeedbackFloatField {
  HebiFeedbackFloatBoardTemperature, /// Ambient temperature inside the module (measured at the IMU chip)
  HebiFeedbackFloatProcessorTemperature, /// Temperature of the processor chip.
  HebiFeedbackFloatVoltage, /// Bus voltage at which the module is running.
  HebiFeedbackFloatVelocity, /// Velocity of the module output (post-spring).
  HebiFeedbackFloatEffort, /// Effort at the module output; units vary (e.g., N * m for rotational joints and N for linear stages).
  HebiFeedbackFloatVelocityCommand, /// Commanded velocity of the module output (post-spring)
  HebiFeedbackFloatEffortCommand, /// Commanded effort at the module output; units vary (e.g., N * m for rotational joints and N for linear stages).
  HebiFeedbackFloatDeflection, /// Difference between the pre-spring and post-spring output position.
  HebiFeedbackFloatDeflectionVelocity, /// Velocity of the difference between the pre-spring and post-spring output position.
  HebiFeedbackFloatMotorVelocity, /// The velocity of the motor shaft.
  HebiFeedbackFloatMotorCurrent, /// Current supplied to the motor.
  HebiFeedbackFloatMotorSensorTemperature, /// The temperature from a sensor near the motor housing.
  HebiFeedbackFloatMotorWindingCurrent, /// The estimated current in the motor windings.
  HebiFeedbackFloatMotorWindingTemperature, /// The estimated temperature of the motor windings.
  HebiFeedbackFloatMotorHousingTemperature, /// The estimated temperature of the motor housing.
  HebiFeedbackFloatBatteryLevel, /// Charge level of the device's battery (in percent).
  HebiFeedbackFloatPwmCommand, /// Commanded PWM signal sent to the motor; final output of PID controllers.
  HebiFeedbackFloatInnerEffortCommand, /// In control strategies 2 and 4, this is the torque of force command going to the inner torque PID loop.
  HebiFeedbackFloatMotorWindingVoltage, /// The motor winding voltage.
  HebiFeedbackFloatMotorPhaseCurrentA, /// The current in phase A of the motor windings.
  HebiFeedbackFloatMotorPhaseCurrentB, /// The current in phase B of the motor windings.
  HebiFeedbackFloatMotorPhaseCurrentC, /// The current in phase C of the motor windings.
  HebiFeedbackFloatMotorPhaseVoltageA, /// The voltage in phase A of the motor windings.
  HebiFeedbackFloatMotorPhaseVoltageB, /// The voltage in phase B of the motor windings.
  HebiFeedbackFloatMotorPhaseVoltageC, /// The voltage in phase C of the motor windings.
  HebiFeedbackFloatMotorPhaseDutyCycleA, /// The duty cycle of phase A of the motor windings.
  HebiFeedbackFloatMotorPhaseDutyCycleB, /// The duty cycle of phase B of the motor windings.
  HebiFeedbackFloatMotorPhaseDutyCycleC, /// The duty cycle of phase C of the motor windings.
  HebiFeedbackFloatMotorFocId, /// The i_d feedback term of the field-oriented control loop running on the motor.
  HebiFeedbackFloatMotorFocIq, /// The i_q feedback term of the field-oriented control loop running on the motor.
  HebiFeedbackFloatMotorFocIdCommand, /// The i_d command term of the field-oriented control loop running on the motor.
  HebiFeedbackFloatMotorFocIqCommand, /// The i_q command term of the field-oriented control loop running on the motor.
} HebiFeedbackFloatField;

typedef enum HebiFeedbackHighResAngleField {
  HebiFeedbackHighResAnglePosition, /// Position of the module output (post-spring).
  HebiFeedbackHighResAnglePositionCommand, /// Commanded position of the module output (post-spring).
  HebiFeedbackHighResAngleMotorPosition, /// The position of an actuator's internal motor before the gear reduction.
} HebiFeedbackHighResAngleField;

typedef enum HebiFeedbackNumberedFloatField {
  HebiFeedbackNumberedFloatDebug, /// Values for internal debug functions (channel 1-9 available).
} HebiFeedbackNumberedFloatField;

typedef enum HebiFeedbackUInt64Field {
  HebiFeedbackUInt64SequenceNumber, /// Sequence number going to module (local)
  HebiFeedbackUInt64ReceiveTime, /// Timestamp of when message was received from module (local)
  HebiFeedbackUInt64TransmitTime, /// Timestamp of when message was transmitted to module (local)
  HebiFeedbackUInt64HardwareReceiveTime, /// Timestamp of when message was received by module (remote)
  HebiFeedbackUInt64HardwareTransmitTime, /// Timestamp of when message was transmitted from module (remote)
  HebiFeedbackUInt64SenderId, /// Unique ID of the module transmitting this feedback
  HebiFeedbackUInt64RxSequenceNumber, /// Sequence number of incoming packet per module (local)
} HebiFeedbackUInt64Field;

typedef enum HebiFeedbackVector3fField {
  HebiFeedbackVector3fAccelerometer, /// Accelerometer data
  HebiFeedbackVector3fGyro, /// Gyro data
  HebiFeedbackVector3fArPosition, /// A device's position in the world as calculated from an augmented reality framework
  HebiFeedbackVector3fForce, /// Cartesian force data, such as from a force/torque sensor
  HebiFeedbackVector3fTorque, /// Cartesian torque data, such as from a force/torque sensor
} HebiFeedbackVector3fField;

typedef enum HebiFeedbackQuaternionfField {
  HebiFeedbackQuaternionfOrientation, /// A filtered estimate of the orientation of the module.
  HebiFeedbackQuaternionfArOrientation, /// A device's orientation in the world as calculated from an augmented reality framework
} HebiFeedbackQuaternionfField;

typedef enum HebiFeedbackEnumField {
  HebiFeedbackEnumTemperatureState, /// Describes how the temperature inside the module is limiting the output of the motor
  HebiFeedbackEnumMstopState, /// Current status of the MStop
  HebiFeedbackEnumPositionLimitState, /// Software-controlled bounds on the allowable position of the module; user settable
  HebiFeedbackEnumVelocityLimitState, /// Software-controlled bounds on the allowable velocity of the module
  HebiFeedbackEnumEffortLimitState, /// Software-controlled bounds on the allowable effort of the module
  HebiFeedbackEnumCommandLifetimeState, /// The state of the command lifetime safety controller, with respect to the current group
  HebiFeedbackEnumArQuality, /// The status of the augmented reality tracking, if using an AR enabled device. See HebiArQuality for values.
  HebiFeedbackEnumMotorHallState, /// The current hall state of the motor
  HebiFeedbackEnumDrivetrainState, /// Current status of the motor drivetrain
} HebiFeedbackEnumField;

typedef enum HebiFeedbackIoPinBank {
  HebiFeedbackIoBankA, /// I/O pin bank a (pins 1-8 available)
  HebiFeedbackIoBankB, /// I/O pin bank b (pins 1-8 available)
  HebiFeedbackIoBankC, /// I/O pin bank c (pins 1-8 available)
  HebiFeedbackIoBankD, /// I/O pin bank d (pins 1-8 available)
  HebiFeedbackIoBankE, /// I/O pin bank e (pins 1-8 available)
  HebiFeedbackIoBankF, /// I/O pin bank f (pins 1-8 available)
} HebiFeedbackIoPinBank;

typedef enum HebiFeedbackLedField {
  HebiFeedbackLedLed, /// The module's LED.
} HebiFeedbackLedField;


////////////////////////////////////////////////////////////////////////////////
/// Info Enums
////////////////////////////////////////////////////////////////////////////////

typedef enum HebiInfoFloatField {
  HebiInfoFloatPositionKp, /// Proportional PID gain for position
  HebiInfoFloatPositionKi, /// Integral PID gain for position
  HebiInfoFloatPositionKd, /// Derivative PID gain for position
  HebiInfoFloatPositionFeedForward, /// Feed forward term for position (this term is multiplied by the target and added to the output).
  HebiInfoFloatPositionDeadZone, /// Error values within +/- this value from zero are treated as zero (in terms of computed proportional output, input to numerical derivative, and accumulated integral error).
  HebiInfoFloatPositionIClamp, /// Maximum allowed value for the output of the integral component of the PID loop; the integrated error is not allowed to exceed value that will generate this number.
  HebiInfoFloatPositionPunch, /// Constant offset to the position PID output outside of the deadzone; it is added when the error is positive and subtracted when it is negative.
  HebiInfoFloatPositionMinTarget, /// Minimum allowed value for input to the PID controller
  HebiInfoFloatPositionMaxTarget, /// Maximum allowed value for input to the PID controller
  HebiInfoFloatPositionTargetLowpass, /// A simple lowpass filter applied to the target set point; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiInfoFloatPositionMinOutput, /// Output from the PID controller is limited to a minimum of this value.
  HebiInfoFloatPositionMaxOutput, /// Output from the PID controller is limited to a maximum of this value.
  HebiInfoFloatPositionOutputLowpass, /// A simple lowpass filter applied to the controller output; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiInfoFloatVelocityKp, /// Proportional PID gain for velocity
  HebiInfoFloatVelocityKi, /// Integral PID gain for velocity
  HebiInfoFloatVelocityKd, /// Derivative PID gain for velocity
  HebiInfoFloatVelocityFeedForward, /// Feed forward term for velocity (this term is multiplied by the target and added to the output).
  HebiInfoFloatVelocityDeadZone, /// Error values within +/- this value from zero are treated as zero (in terms of computed proportional output, input to numerical derivative, and accumulated integral error).
  HebiInfoFloatVelocityIClamp, /// Maximum allowed value for the output of the integral component of the PID loop; the integrated error is not allowed to exceed value that will generate this number.
  HebiInfoFloatVelocityPunch, /// Constant offset to the velocity PID output outside of the deadzone; it is added when the error is positive and subtracted when it is negative.
  HebiInfoFloatVelocityMinTarget, /// Minimum allowed value for input to the PID controller
  HebiInfoFloatVelocityMaxTarget, /// Maximum allowed value for input to the PID controller
  HebiInfoFloatVelocityTargetLowpass, /// A simple lowpass filter applied to the target set point; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiInfoFloatVelocityMinOutput, /// Output from the PID controller is limited to a minimum of this value.
  HebiInfoFloatVelocityMaxOutput, /// Output from the PID controller is limited to a maximum of this value.
  HebiInfoFloatVelocityOutputLowpass, /// A simple lowpass filter applied to the controller output; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiInfoFloatEffortKp, /// Proportional PID gain for effort
  HebiInfoFloatEffortKi, /// Integral PID gain for effort
  HebiInfoFloatEffortKd, /// Derivative PID gain for effort
  HebiInfoFloatEffortFeedForward, /// Feed forward term for effort (this term is multiplied by the target and added to the output).
  HebiInfoFloatEffortDeadZone, /// Error values within +/- this value from zero are treated as zero (in terms of computed proportional output, input to numerical derivative, and accumulated integral error).
  HebiInfoFloatEffortIClamp, /// Maximum allowed value for the output of the integral component of the PID loop; the integrated error is not allowed to exceed value that will generate this number.
  HebiInfoFloatEffortPunch, /// Constant offset to the effort PID output outside of the deadzone; it is added when the error is positive and subtracted when it is negative.
  HebiInfoFloatEffortMinTarget, /// Minimum allowed value for input to the PID controller
  HebiInfoFloatEffortMaxTarget, /// Maximum allowed value for input to the PID controller
  HebiInfoFloatEffortTargetLowpass, /// A simple lowpass filter applied to the target set point; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiInfoFloatEffortMinOutput, /// Output from the PID controller is limited to a minimum of this value.
  HebiInfoFloatEffortMaxOutput, /// Output from the PID controller is limited to a maximum of this value.
  HebiInfoFloatEffortOutputLowpass, /// A simple lowpass filter applied to the controller output; needs to be between 0 and 1. At each timestep: x_t = x_t * a + x_{t-1} * (1 - a).
  HebiInfoFloatSpringConstant, /// The spring constant of the module.
  HebiInfoFloatVelocityLimitMin, /// The firmware safety limit for the minimum allowed velocity.
  HebiInfoFloatVelocityLimitMax, /// The firmware safety limit for the maximum allowed velocity.
  HebiInfoFloatEffortLimitMin, /// The firmware safety limit for the minimum allowed effort.
  HebiInfoFloatEffortLimitMax, /// The firmware safety limit for the maximum allowed effort.
  HebiInfoFloatUserSettingsFloat1, /// Gets the value of the user setting float field "1" (if requested + exists)
  HebiInfoFloatUserSettingsFloat2, /// Gets the value of the user setting float field "2" (if requested + exists)
  HebiInfoFloatUserSettingsFloat3, /// Gets the value of the user setting float field "3" (if requested + exists)
  HebiInfoFloatUserSettingsFloat4, /// Gets the value of the user setting float field "4" (if requested + exists)
  HebiInfoFloatUserSettingsFloat5, /// Gets the value of the user setting float field "5" (if requested + exists)
  HebiInfoFloatUserSettingsFloat6, /// Gets the value of the user setting float field "6" (if requested + exists)
  HebiInfoFloatUserSettingsFloat7, /// Gets the value of the user setting float field "7" (if requested + exists)
  HebiInfoFloatUserSettingsFloat8, /// Gets the value of the user setting float field "8" (if requested + exists)
} HebiInfoFloatField;

typedef enum HebiInfoHighResAngleField {
  HebiInfoHighResAnglePositionLimitMin, /// The firmware safety limit for the minimum allowed position.
  HebiInfoHighResAnglePositionLimitMax, /// The firmware safety limit for the maximum allowed position.
} HebiInfoHighResAngleField;

typedef enum HebiInfoUInt64Field {
  HebiInfoUInt64IpAddress, /// The IP address of the module
  HebiInfoUInt64SubnetMask, /// Subnet mask of the module
  HebiInfoUInt64DefaultGateway, /// Default gateway of the module
  HebiInfoUInt64RuntimeSecondsCommanded, /// How many seconds the module has been commanded for
  HebiInfoUInt64RuntimeSecondsOn, /// How many seconds the module has been on for
} HebiInfoUInt64Field;

typedef enum HebiInfoBoolField {
  HebiInfoBoolPositionDOnError, /// Controls whether the Kd term uses the "derivative of error" or "derivative of measurement." When the setpoints have step inputs or are noisy, setting this to @c false can eliminate corresponding spikes or noise in the output.
  HebiInfoBoolVelocityDOnError, /// Controls whether the Kd term uses the "derivative of error" or "derivative of measurement." When the setpoints have step inputs or are noisy, setting this to @c false can eliminate corresponding spikes or noise in the output.
  HebiInfoBoolEffortDOnError, /// Controls whether the Kd term uses the "derivative of error" or "derivative of measurement." When the setpoints have step inputs or are noisy, setting this to @c false can eliminate corresponding spikes or noise in the output.
  HebiInfoBoolAccelIncludesGravity, /// Whether to include acceleration due to gravity in acceleration feedback.
} HebiInfoBoolField;

typedef enum HebiInfoStringField {
  HebiInfoStringName, /// The name for this module. The string must be null-terminated and less than 21 characters.
  HebiInfoStringFamily, /// The family for this module. The string must be null-terminated and less than 21 characters.
  HebiInfoStringSerial, /// Gets the serial number for this module (e.g., X5-0001).
  HebiInfoStringElectricalType, /// Gets the electrical type for this module
  HebiInfoStringElectricalRevision, /// Gets the electrical revision for this module
  HebiInfoStringMechanicalType, /// Gets the mechanical type for this module
  HebiInfoStringMechanicalRevision, /// Gets the mechanical revision for this module
  HebiInfoStringFirmwareType, /// Gets the firmware type for this module
  HebiInfoStringFirmwareRevision, /// Gets the firmware revision for this module
  HebiInfoStringUserSettingsBytes1, /// Gets the value of the user setting bytes field "1" (if requested + exists)
  HebiInfoStringUserSettingsBytes2, /// Gets the value of the user setting bytes field "2" (if requested + exists)
  HebiInfoStringUserSettingsBytes3, /// Gets the value of the user setting bytes field "3" (if requested + exists)
  HebiInfoStringUserSettingsBytes4, /// Gets the value of the user setting bytes field "4" (if requested + exists)
  HebiInfoStringUserSettingsBytes5, /// Gets the value of the user setting bytes field "5" (if requested + exists)
  HebiInfoStringUserSettingsBytes6, /// Gets the value of the user setting bytes field "6" (if requested + exists)
  HebiInfoStringUserSettingsBytes7, /// Gets the value of the user setting bytes field "7" (if requested + exists)
  HebiInfoStringUserSettingsBytes8, /// Gets the value of the user setting bytes field "8" (if requested + exists)
} HebiInfoStringField;

typedef enum HebiInfoFlagField {
  HebiInfoFlagSaveCurrentSettings, /// Indicates if the module should save the current values of all of its settings.
} HebiInfoFlagField;

typedef enum HebiInfoEnumField {
  HebiInfoEnumControlStrategy, /// How the position, velocity, and effort PID loops are connected in order to control motor PWM.
  HebiInfoEnumCalibrationState, /// The calibration state of the module
  HebiInfoEnumMstopStrategy, /// The motion stop strategy for the actuator
  HebiInfoEnumMinPositionLimitStrategy, /// The position limit strategy (at the minimum position) for the actuator
  HebiInfoEnumMaxPositionLimitStrategy, /// The position limit strategy (at the maximum position) for the actuator
} HebiInfoEnumField;

typedef enum HebiInfoIoPinBank {
  HebiInfoIoBankA, /// I/O pin bank a (pins 1-8 available)
  HebiInfoIoBankB, /// I/O pin bank b (pins 1-8 available)
  HebiInfoIoBankC, /// I/O pin bank c (pins 1-8 available)
  HebiInfoIoBankD, /// I/O pin bank d (pins 1-8 available)
  HebiInfoIoBankE, /// I/O pin bank e (pins 1-8 available)
  HebiInfoIoBankF, /// I/O pin bank f (pins 1-8 available)
} HebiInfoIoPinBank;

typedef enum HebiInfoLedField {
  HebiInfoLedLed, /// The module's LED.
} HebiInfoLedField;

static const uint64_t HebiInfoExtraFieldsEthernetInfo = 1;
static const uint64_t HebiInfoExtraFieldsUserData = (HebiInfoExtraFieldsEthernetInfo << 1);
static const uint64_t HebiInfoExtraFieldsFirmwareInfo = (HebiInfoExtraFieldsUserData << 1);
static const uint64_t HebiInfoExtraFieldsRuntimeData = (HebiInfoExtraFieldsFirmwareInfo << 1);

////////////////////////////////////////////////////////////////////////////////
/// RobotModel Enums
////////////////////////////////////////////////////////////////////////////////

/**
 * Which frame to report results in (e.g., for getForwardKinematics and other
 * functions.
 */
typedef enum HebiFrameType {
  HebiFrameTypeCenterOfMass,
  HebiFrameTypeOutput,
  HebiFrameTypeEndEffector,
  HebiFrameTypeInput,
  HebiFrameTypeMesh,
  HebiFrameTypePayload
} HebiFrameType;

/**
 * Which type of robot model element (e.g. actuator, link, etc.)
 */

typedef enum HebiRobotModelElementType {
  HebiRobotModelElementTypeOther,
  HebiRobotModelElementTypeActuator,
  HebiRobotModelElementTypeBracket,
  HebiRobotModelElementTypeJoint,
  HebiRobotModelElementTypeLink,
  HebiRobotModelElementTypeRigidBody,
  HebiRobotModelElementTypeEndEffector
} HebiRobotModelElementType;

/**
 * What the type of motion (axis, rotation, translation, etc) is allowed by a
 * joint.
 */
typedef enum HebiJointType {
  HebiJointTypeRotationX,
  HebiJointTypeRotationY,
  HebiJointTypeRotationZ,
  HebiJointTypeTranslationX,
  HebiJointTypeTranslationY,
  HebiJointTypeTranslationZ
} HebiJointType;

/**
 * The type of actuators supported by the API
 */
typedef enum HebiActuatorType {
  HebiActuatorTypeX5_1,
  HebiActuatorTypeX5_4,
  HebiActuatorTypeX5_9,
  HebiActuatorTypeX8_3,
  HebiActuatorTypeX8_9,
  HebiActuatorTypeX8_16,
  HebiActuatorTypeR8_3,
  HebiActuatorTypeR8_9,
  HebiActuatorTypeR8_16,
  HebiActuatorTypeT5_1,
  HebiActuatorTypeT5_4,
  HebiActuatorTypeT5_9,
  HebiActuatorTypeT8_3,
  HebiActuatorTypeT8_9,
  HebiActuatorTypeT8_16,
  HebiActuatorTypeR25_8,
  HebiActuatorTypeR25_20,
  HebiActuatorTypeR25_40,
  HebiActuatorTypeT25_8,
  HebiActuatorTypeT25_20,
  HebiActuatorTypeT25_40,
  HebiActuatorTypeH25_45,
  HebiActuatorTypeH25_90,
  HebiActuatorTypeH25_140
} HebiActuatorType;

/**
 * The type of links supported by the API
 */
typedef enum HebiLinkType {
  HebiLinkTypeX5,
  HebiLinkTypeR8,
  HebiLinkTypeR25,
  HebiLinkTypeR25_R8,
  HebiLinkTypeH25
} HebiLinkType;

/**
 * The type of link inputs supported by the API
 */
typedef enum HebiLinkInputType {
  HebiLinkInputTypeRightAngle,
  HebiLinkInputTypeInline
} HebiLinkInputType;

/**
 * The type of link outputs supported by the API
 */
typedef enum HebiLinkOutputType {
  HebiLinkOutputTypeRightAngle,
  HebiLinkOutputTypeInline
} HebiLinkOutputType;

/**
 * The type of brackets supported by the API
 */
typedef enum HebiBracketType {
  HebiBracketTypeX5LightLeft,
  HebiBracketTypeX5LightRight,
  HebiBracketTypeX5HeavyLeftInside,
  HebiBracketTypeX5HeavyLeftOutside,
  HebiBracketTypeX5HeavyRightInside,
  HebiBracketTypeX5HeavyRightOutside,
  HebiBracketTypeR8LightLeft,
  HebiBracketTypeR8LightRight,
  HebiBracketTypeR8HeavyLeftInside,
  HebiBracketTypeR8HeavyLeftOutside,
  HebiBracketTypeR8HeavyRightInside,
  HebiBracketTypeR8HeavyRightOutside,
  HebiBracketTypeR25LightLeft,
  HebiBracketTypeR25LightRight,
  HebiBracketTypeR25HeavyLeftInside,
  HebiBracketTypeR25HeavyLeftOutside,
  HebiBracketTypeR25HeavyRightInside,
  HebiBracketTypeR25HeavyRightOutside
} HebiBracketType;

/**
 * The type of end effectors supported by the API
 */
typedef enum HebiEndEffectorType {
  HebiEndEffectorTypeCustom,
  HebiEndEffectorTypeX5Parallel,
  HebiEndEffectorTypeR8Parallel
} HebiEndEffectorType;

/**
 * How a matrix is serialized to an array.
 */
typedef enum HebiMatrixOrdering {
  HebiMatrixOrderingRowMajor,
  HebiMatrixOrderingColumnMajor
} HebiMatrixOrdering;

////////////////////////////////////////////////////////////////////////////////
/// Typedefs
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief The C-style's API representation of a command.
 *
 * Encapsulates data to be sent to a module
 */
typedef struct HebiCommand_* HebiCommandPtr;

/**
 * \brief The C-style's API representation of feedback.
 *
 * Encapsulates feedback received from a module
 */
typedef struct HebiFeedback_* HebiFeedbackPtr;

/**
 * \brief The C-style's API representation of info.
 *
 * Encapsulates info (settings, etc.) received from a module
 */
typedef struct HebiInfo_* HebiInfoPtr;

/**
 * \brief The C-style's API representation of a command object for a
 * group of modules.
 *
 * This is an iterable list of command structures; commands are sent to modules in a group using the
 * fields within this structure.
 */
typedef struct HebiGroupCommand_* HebiGroupCommandPtr;

/**
 * \brief The C-style's API representation of a feedback object for a
 * group of modules.
 *
 * This is an iterable list of feedback structures; feedback from modules in a group are retrieved primarily through
 * this structure.
 */
typedef struct HebiGroupFeedback_* HebiGroupFeedbackPtr;

/**
 * \brief The C-style's API representation of a info object for a
 * group of modules.
 *
 * This is an iterable list of info structures; info from modules in a group are retrieved primarily through
 * this structure.
 */
typedef struct HebiGroupInfo_* HebiGroupInfoPtr;

/**
 * \brief The C-style's API representation of a group.
 *
 * Represents a connection to a group of modules. Sends commands to and receives
 * feedback from the group.
 */
typedef struct HebiGroup_* HebiGroupPtr;

/**
 * Maintains a registry of network-connected modules and returns Group objects
 * to the user. Only one Lookup object is needed per application.
 *
 */
typedef struct HebiLookup_* HebiLookupPtr;

/**
 * A list of entries that represent a snapshot of the state of the lookup object
 * at some point in time.  These entries include network HEBI devices such
 * as actuators.
 */
typedef struct HebiLookupEntryList_* HebiLookupEntryListPtr;

/**
 * \brief The C-style's API representation of a log file.
 *
 * Represents a log file generated by the API.
 */
typedef struct HebiLogFile_* HebiLogFilePtr;

/**
 * \brief The C-style's API representation of a string.
 *
 * Represents a null terminated UTF-8 string
 */
typedef struct HebiString_* HebiStringPtr;

/**
 * A robot model object which stores a tree of connected modules, and allows for
 * computation of forward kinematics, jacobians, and more.
 */
typedef struct HebiRobotModel_* HebiRobotModelPtr;

/**
 * Contains a robot model element, which has an input and zero or more outputs.
 * This may refer to a rigid body or a massless joint.
 */
typedef struct HebiRobotModelElement_* HebiRobotModelElementPtr;

/**
 * An inverse kinematics object which uses a kinematics object to search for
 * joint angles that optimize any of several objectives while respecting defined
 * constraints.
 */
typedef struct HebiIK_* HebiIKPtr;

/**
 * \brief The C-style's API representation of a trajectory.
 *
 * Do not inherit from this; only obtain pointers through the API!
 *
 * Used to generate position, velocity, and acceleration for different joints.
 *
 * NOTE -- deprecated in favor of HebiGroupTrajectory
 */
typedef struct HebiTrajectory_* HebiTrajectoryPtr;

/**
 * \brief The C-style's API representation of a trajectory.
 *
 * Do not inherit from this; only obtain pointers through the API!
 *
 * Used to generate position, velocity, and acceleration for sets of joints.
 */
typedef struct HebiGroupTrajectory_* HebiGroupTrajectoryPtr;

/**
 * \brief Group feedback handling function signature
 */
typedef void (*GroupFeedbackHandlerFunction)(HebiGroupFeedbackPtr fbk, void* user_data);

////////////////////////////////////////////////////////////////////////////////
/// Structures
////////////////////////////////////////////////////////////////////////////////

typedef struct HebiMacAddress_ {
  uint8_t bytes_[6];
} HebiMacAddress;

typedef struct HebiVector3f_ {
  float x;
  float y;
  float z;
} HebiVector3f;

typedef struct HebiQuaternionf_ {
  float w;
  float x;
  float y;
  float z;
} HebiQuaternionf;

// Used to store references to user state to be logged.
// NULL entries indicate to not add this state entry.
//
// When using this entry to add a log entry, must ensure
// referenced data is valid and allocated throughout use
// of the structure.
typedef struct HebiUserState_ {
  double* state1;
  double* state2;
  double* state3;
  double* state4;
  double* state5;
  double* state6;
  double* state7;
  double* state8;
  double* state9;
} HebiUserState;

/**
 * Contains matadata information about a robot element (e.g. element is an X5-9 actuator)
 */
typedef struct HebiRobotModelElementMetadata_ {
  uint32_t struct_size_;
  HebiRobotModelElementType element_type_;
  union {
    struct /*Actuator Type */ {
      HebiActuatorType actuator_type_;
    };
    struct /*Bracket Type */ {
      HebiBracketType bracket_type_;
    };
    struct /*Joint Type */ {
      HebiJointType joint_type_;
      double gear_ratio_;
    };
    struct /*Link Type*/ {
      HebiLinkType link_type_;
      HebiLinkInputType input_type_;
      HebiLinkOutputType output_type_;
      float extension_;
      float twist_;
    };
    struct /*End effector Type*/ {
      HebiEndEffectorType end_effector_type_;
    };
  };
} HebiRobotModelElementMetadata;

typedef struct HebiRobotModelElementTopology_ {
  int32_t element_index_;
  int32_t parent_index_;
  int32_t parent_output_;
  int32_t dof_location_;
  int32_t com_index_;
  int32_t output_index_;
  int32_t end_effector_index_;
} HebiRobotModelElementTopology;

typedef struct HebiHighResAngleStruct_ {
  int64_t revolutions_;
  float offset_;
} HebiHighResAngleStruct;

typedef struct HebiIoBankPinStruct_ {
  union {
    int64_t int_value_;
    float float_value_;    
  };
  HebiIoBankPinResidentType stored_type_;
} HebiIoBankPinStruct;

/**
 * Direct Command field reference
 */
typedef struct HebiCommandRef_ {
  int32_t* message_bitfield_;
  float* float_fields_;
  HebiHighResAngleStruct* high_res_angle_fields_;
  HebiVector3f* vector3f_fields_;
  HebiQuaternionf* quaternionf_fields_;
  uint64_t* uint64_fields_;
  int32_t* enum_fields_;
  bool* bool_fields_;
  float* numbered_float_fields_;
  HebiIoBankPinStruct* io_fields_;
  uint32_t* led_fields_;
  void* reserved_;
} HebiCommandRef;

/**
 * Command metadata which is guaranteed to be static for the loaded library
 */
typedef struct HebiCommandMetadata_ {
  // Total number of fields for each field type
  uint32_t float_field_count_;
  uint32_t high_res_angle_field_count_;
  uint32_t vector3f_field_count_;
  uint32_t quaternionf_field_count_;
  uint32_t uint64_field_count_;
  uint32_t enum_field_count_;
  uint32_t bool_field_count_;
  uint32_t numbered_float_field_count_;
  uint32_t io_field_count_;
  uint32_t led_field_count_;
  uint32_t string_field_count_;
  uint32_t flag_field_count_;
  // Field offsets into `message_bitfield_`
  uint32_t float_field_bitfield_offset_;
  uint32_t high_res_angle_field_bitfield_offset_;
  uint32_t vector3f_field_bitfield_offset_;
  uint32_t quaternionf_field_bitfield_offset_;
  uint32_t uint64_field_bitfield_offset_;
  uint32_t enum_field_bitfield_offset_;
  uint32_t bool_field_bitfield_offset_;
  uint32_t numbered_float_field_bitfield_offset_;
  uint32_t io_field_bitfield_offset_;
  uint32_t led_field_bitfield_offset_;
  uint32_t string_field_bitfield_offset_;
  uint32_t flag_field_bitfield_offset_;
  // Corresponds to the relative offset within the relevant block of `HebiCommandRef::message_bitfield_` for individual numbered float fields.
  const uint32_t* numbered_float_relative_offsets_;
  const uint32_t* numbered_float_field_sizes_;
  // Corresponds to the relative offset within the relevant block of `HebiCommandRef::message_bitfield_` for individual io bank pins.
  const uint32_t* io_relative_offsets_;
  const uint32_t* io_field_sizes_;
  // Total number of bits in `message_bitfield_`
  uint32_t message_bitfield_count_;
} HebiCommandMetadata;

/**
 * Direct Feedback field reference
 */
typedef struct HebiFeedbackRef_ {
  const int32_t* message_bitfield_;
  const float* float_fields_;
  const HebiHighResAngleStruct* high_res_angle_fields_;
  const HebiVector3f* vector3f_fields_;
  const HebiQuaternionf* quaternionf_fields_;
  const uint64_t* uint64_fields_;
  const int32_t* enum_fields_;
  const bool* bool_fields_;
  const float* numbered_float_fields_;
  const HebiIoBankPinStruct* io_fields_;
  const uint32_t* led_fields_;
  void* reserved_;
} HebiFeedbackRef;

/**
 * Feedback metadata which is guaranteed to be static for the loaded library
 */
typedef struct HebiFeedbackMetadata_ {
  // Total number of fields for each field type
  uint32_t float_field_count_;
  uint32_t high_res_angle_field_count_;
  uint32_t vector3f_field_count_;
  uint32_t quaternionf_field_count_;
  uint32_t uint64_field_count_;
  uint32_t enum_field_count_;
  uint32_t bool_field_count_;
  uint32_t numbered_float_field_count_;
  uint32_t io_field_count_;
  uint32_t led_field_count_;
  uint32_t string_field_count_;
  uint32_t flag_field_count_;
  // Field offsets into `message_bitfield_`
  uint32_t float_field_bitfield_offset_;
  uint32_t high_res_angle_field_bitfield_offset_;
  uint32_t vector3f_field_bitfield_offset_;
  uint32_t quaternionf_field_bitfield_offset_;
  uint32_t uint64_field_bitfield_offset_;
  uint32_t enum_field_bitfield_offset_;
  uint32_t bool_field_bitfield_offset_;
  uint32_t numbered_float_field_bitfield_offset_;
  uint32_t io_field_bitfield_offset_;
  uint32_t led_field_bitfield_offset_;
  uint32_t string_field_bitfield_offset_;
  uint32_t flag_field_bitfield_offset_;
  // Corresponds to the relative offset within the relevant block of `HebiFeedbackRef::message_bitfield_` for individual numbered float fields.
  const uint32_t* numbered_float_relative_offsets_;
  const uint32_t* numbered_float_field_sizes_;
  // Corresponds to the relative offset within the relevant block of `HebiFeedbackRef::message_bitfield_` for individual io bank pins.
  const uint32_t* io_relative_offsets_;
  const uint32_t* io_field_sizes_;
  // Total number of bits in `message_bitfield_`
  uint32_t message_bitfield_count_;
} HebiFeedbackMetadata;

/**
 * Direct Info field reference
 */
typedef struct HebiInfoRef_ {
  const int32_t* message_bitfield_;
  const float* float_fields_;
  const HebiHighResAngleStruct* high_res_angle_fields_;
  const HebiVector3f* vector3f_fields_;
  const HebiQuaternionf* quaternionf_fields_;
  const uint64_t* uint64_fields_;
  const int32_t* enum_fields_;
  const bool* bool_fields_;
  const float* numbered_float_fields_;
  const HebiIoBankPinStruct* io_fields_;
  const uint32_t* led_fields_;
  void* reserved_;
} HebiInfoRef;

/**
 * Info metadata which is guaranteed to be static for the loaded library
 */
typedef struct HebiInfoMetadata_ {
  // Total number of fields for each field type
  uint32_t float_field_count_;
  uint32_t high_res_angle_field_count_;
  uint32_t vector3f_field_count_;
  uint32_t quaternionf_field_count_;
  uint32_t uint64_field_count_;
  uint32_t enum_field_count_;
  uint32_t bool_field_count_;
  uint32_t numbered_float_field_count_;
  uint32_t io_field_count_;
  uint32_t led_field_count_;
  uint32_t string_field_count_;
  uint32_t flag_field_count_;
  // Field offsets into `message_bitfield_`
  uint32_t float_field_bitfield_offset_;
  uint32_t high_res_angle_field_bitfield_offset_;
  uint32_t vector3f_field_bitfield_offset_;
  uint32_t quaternionf_field_bitfield_offset_;
  uint32_t uint64_field_bitfield_offset_;
  uint32_t enum_field_bitfield_offset_;
  uint32_t bool_field_bitfield_offset_;
  uint32_t numbered_float_field_bitfield_offset_;
  uint32_t io_field_bitfield_offset_;
  uint32_t led_field_bitfield_offset_;
  uint32_t string_field_bitfield_offset_;
  uint32_t flag_field_bitfield_offset_;
  // Corresponds to the relative offset within the relevant block of `HebiInfoRef::message_bitfield_` for individual numbered float fields.
  const uint32_t* numbered_float_relative_offsets_;
  const uint32_t* numbered_float_field_sizes_;
  // Corresponds to the relative offset within the relevant block of `HebiInfoRef::message_bitfield_` for individual io bank pins.
  const uint32_t* io_relative_offsets_;
  const uint32_t* io_field_sizes_;
  // Total number of bits in `message_bitfield_`
  uint32_t message_bitfield_count_;
} HebiInfoMetadata;

////////////////////////////////////////////////////////////////////////////////
/// Lookup API
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Create a Lookup instance.
 *
 * Lookup created by this function must be released with 'hebiLookupRelease'
 * when no longer needed.
 *
 * Note that this call invokes a background thread to query the network for
 * modules at regular intervals.
 * 
 * \param ifaces A buffer of c-style strings representing the interfaces
 *               to which to restrict the module discovery. The contents
 *               of the strings must be in human readable
 *               order (_e.g._, "192.168.1.0").
 *               If this parameter is null, then all interfaces are used
 *               to discover modules.
 *                                       
 * \param ifaces_length the length of the buffer `ifaces`. This must be zero
 *                      if `ifaces` is null.
 */
HebiLookupPtr hebiLookupCreate(const char* const* ifaces, size_t ifaces_length);

/**
 * \brief Frees resources created by the lookup object.
 *
 * Lookup object should no longer be used after this function is called!
 * Note that background query thread is stopped by this function.
 */
void hebiLookupRelease(HebiLookupPtr lookup);

/**
 * \brief Determines if the lookup object is in a valid state.  If not, no
 * interfaces could be found and it should be reset.
 *
 * \returns 1 if in a valid state, 0 otherwise.
 */
int hebiLookupIsValid(HebiLookupPtr lookup);

/**
 * \brief Resets the lookup object.
 *
 * Equivalent to calling `hebiLookupRelease` followed by `hebiLookupCreate`, except
 * that the `HebiLookupPtr` does not change value.
 *
 * \param lookup The existint HebiLookupPtr object to reinitialize
 * \param ifaces See `hebiLookupCreate`
 * \param ifaces_length See `hebiLookupCreate`
 */
void hebiLookupReset(HebiLookupPtr lookup, const char* const* ifaces, size_t ifaces_length);

/**
 * \brief sets the lookup request rate [Hz]
 *
 * \returns HebiStatusSuccess on success, HebiStatusInvalidArgument on negative or non-finite frequency
 */
HebiStatusCode hebiLookupSetLookupFrequencyHz(HebiLookupPtr lookup, double frequency);

/**
 * \brief gets the lookup request rate [Hz]
 */
double hebiLookupGetLookupFrequencyHz(HebiLookupPtr lookup);

/**
 * \brief Return a snapshot of the contents of the module registry -- i.e.,
 * which modules have been found by the lookup.
 *
 * \param lookup A valid HebiLookup object.
 */
HebiLookupEntryListPtr hebiCreateLookupEntryList(HebiLookupPtr lookup);

/**
 * Gets the number of entries in the lookup entry list.
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 */
size_t hebiLookupEntryListGetSize(HebiLookupEntryListPtr lookup_list);

/**
 * Gets the name of the given entry in the lookup entry list. Must be a valid
 * index.
 *
 * To only query the length of the string, provide a null pointer for the buffer parameter.
 * If the provided buffer is not large enough to hold the string (the length determined by the length parameter),
 * the call will fail. Note that the size of this buffer includes the null
 * terminating character.
 *
 * Note - assumes ASCII string encoding.
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 * \param index The entry index that is being queried.
 * \param buffer An allocated buffer of length 'length'
 * \param length the length of the provided buffer. After calling this function, the value dereferenced will be
 * updated with the length of the string plus the null character. This argument must not be NULL.
 *
 * \returns HebiStatusSuccess on success, HebiStatusBufferTooSmall if the provided buffer is too small, or
 * HebiStatusInvalidArgument if the length parameter is null
 */
HebiStatusCode hebiLookupEntryListGetName(HebiLookupEntryListPtr lookup_list, size_t index, char* buffer,
                                          size_t* length);

/**
 * Gets the family of the given entry in the lookup entry list. Must be a valid
 * index.
 *
 * To only query the length of the string, provide a null pointer for the buffer parameter.
 * If the provided buffer is not large enough to hold the string (the length determined by the length parameter),
 * the call will fail. Note that the size of this buffer includes the null
 * terminating character.
 *
 * Note - assumes ASCII string encoding.
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 * \param index The entry index that is being queried.
 * \param buffer An allocated buffer of length 'length'.
 * \param length the length of the provided buffer. After calling this function, the value dereferenced will be
 * updated with the length of the string plus the null character. This argument must not be NULL.
 *
 * \returns HebiStatusSuccess on success, HebiStatusBufferTooSmall if the provided buffer is too small, or
 * HebiStatusInvalidArgument if the length parameter is null
 */
HebiStatusCode hebiLookupEntryListGetFamily(HebiLookupEntryListPtr lookup_list, size_t index, char* buffer,
                                            size_t* length);

/**
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 * \param index The entry index that is being queried.
 * \param mac_address A pointer to an allocated HebiMacAddress structure that
 * the function will update with the mac address of the given entry.
 *
 * \returns HebiStatusSuccess on success, HebiStatusInvalidArgument if the
 * mac_address parameter is null, or HebiStatusArgumentOutOfRange if there is
 * no entry with the given index.
 */
HebiStatusCode hebiLookupEntryListGetMacAddress(HebiLookupEntryListPtr lookup_list, size_t index,
                                                HebiMacAddress* mac_address);

/**
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 * \param index The entry index that is being queried.
 * \param ip_address A pointer to a uint32_t which will be updated with the
 * network-order (big-endian) IP address of the entry.
 *
 * \returns HebiStatusSuccess on success, HebiStatusInvalidArgument if the
 * ip_address parameter is null, or HebiStatusArgumentOutOfRange if there is
 * no entry with the given index.
 */
HebiStatusCode hebiLookupEntryListGetIpAddress(HebiLookupEntryListPtr lookup_list, size_t index,
                                               uint32_t* ip_address);

/**
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 * \param index The entry index that is being queried.
 * \param is_stale A pointer to an int32_t which will be updated with the "stale"
 * state of the module.  This is "true" if the module has been unresponsive to
 * quieries for the past 5 seconds.
 *
 * \returns HebiStatusSuccess on success, HebiStatusInvalidArgument if the
 * is_stale parameter is null, or HebiStatusArgumentOutOfRange if there is
 * no entry with the given index.
 */
HebiStatusCode hebiLookupEntryListGetIsStale(HebiLookupEntryListPtr lookup_list, size_t index,
                                             int32_t* is_stale);

/**
 * \brief Release resources for a given lookup entry list; list should not be
 * used after this call.
 *
 * \param lookup_list A valid HebiLookupEntryList object.
 */
void hebiLookupEntryListRelease(HebiLookupEntryListPtr lookup_list);

////////////////////////////////////////////////////////////////////////////////
/// Group API
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Creates an "imitation" group with the specified number of modules.
 *
 * The imitation group is useful for testing the API, as it acts like a Group
 * would in most cases, but is not backed by hardware.  Commands that are
 * sent to the imitation group are returned as feedback, using the standard
 * feedback request methods.
 *
 * Note that standard groups are created through the HebiLookup objects.
 *
 * \param size The number of modules in the group.
 *
 * \returns An imitation group that returns commanded values as feedback.
 */
HebiGroupPtr hebiGroupCreateImitation(size_t size);

/**
 * \brief Create a group of modules with the given MAC addresses.
 *
 * If any given modules are not found, no group is created.
 *
 * Blocking call which waits to get a pointer to a Group object with the
 * given parameters.  Times out after timeout_msec milliseconds. Must be
 * released when use is complete via the hebiGroupRelease function.
 *
 * \param lookup A valid HebiLookup object.
 * \param addresses An array of pointers to physical mac addresses of the given
 * modules. Length of the array must equal num_addresses. This param must not be
 * NULL, and each element of this list must not be NULL.
 * \param num_addresses Length of the addresses array of pointers (number of
 * pointers in the array, not cumulative size of objects they point to).
 * \param timeout_ms Timeout in milliseconds.  A value of -1 blocks until
 * a module is found, and a value of 0 returns immediately if no module with
 * that address is currently known by the Lookup class.
 * \returns NULL if matching group not found in allotted time; pointer to newly
 * allocated group object otherwise.
 */
HebiGroupPtr hebiGroupCreateFromMacs(HebiLookupPtr lookup, const HebiMacAddress* const* addresses, size_t num_addresses,
                                     int32_t timeout_ms);

/**
 * \brief Create a group with modules matching the given names and families.
 *
 * If only one family is given, it is used for all modules.  Otherwise, number of
 * names and families must match. If any given modules are not found, no group is
 * created.
 *
 * Blocking call which waits to get a pointer to a Group object with the
 * given parameters.  Times out after timeout_msec milliseconds. Must be
 * released when use is complete via the hebiGroupRelease function.
 *
 * \param lookup A valid HebiLookup object.
 * \param families The given families of the modules, as viewable in the HEBI
 * GUI. Must be a list of pointers to null-terminated strings. The number of
 * pointers must match the num_families parameter. Note that a single string
 * (with corresponding value of num_families == 1) will be used with each name
 * in the names list. This param must not be NULL, and each element of this list
 * must not be NULL.
 * \param num_families The number of pointers to null-terminated strings given
 * by the families parameter. Note that this must either be 1, or be equal to
 * num_names.
 * \param names The given names of the modules, as viewable in the HEBI GUI. Must
 * be a list of pointers to null-terminated strings. The number of pointers must
 * match the num_names parameter. This param must not be NULL, and each element
 * of this list must not be NULL.
 * \param num_names The number of pointers to null-terminated strings given
 * by the names parameter.
 * \param timeout_ms Timeout in milliseconds.  A value of -1 blocks until
 * a module is found, and a value of 0 returns immediately if no module with
 * that address is currently known by the Lookup class.
 * \returns NULL if matching group not found in allotted time; pointer to newly
 * allocated group object otherwise.
 */
HebiGroupPtr hebiGroupCreateFromNames(HebiLookupPtr lookup, const char* const* families, size_t num_families,
                                      const char* const* names, size_t num_names, int32_t timeout_ms);

/**
 * \brief Create a group with all modules known to the lookup with the given family.
 *
 * Group contains all modules with the given family, regardless of name.
 *
 * Blocking call which waits to get a pointer to a Group object with the
 * given parameters.  Times out after timeout_msec milliseconds. Must be
 * released when use is complete via the hebiGroupRelease function.
 *
 * \param lookup A valid HebiLookup object.
 * \param family The given family of the modules, as viewable in the HEBI GUI.
 * Must be a null-terminated string, and must not be NULL.
 * \param timeout_ms Timeout in milliseconds.  A value of -1 blocks until
 * a module is found, and a value of 0 returns immediately if no module with
 * that address is currently known by the Lookup class.
 * \returns NULL if matching group not found in allotted time; pointer to newly
 * allocated group object otherwise.
 */
HebiGroupPtr hebiGroupCreateFromFamily(HebiLookupPtr lookup, const char* family, int32_t timeout_ms);

/**
 * \brief Create a group with all modules connected to module with the given MAC
 * address.
 *
 * Modules in group will be ordered depth-first, starting with the most proximal
 * module.
 *
 * Blocking call which waits to get a pointer to a Group object with the
 * given parameters.  Times out after timeout_msec milliseconds. Must be
 * released when use is complete via the hebiGroupRelease function.
 *
 * \param lookup A valid HebiLookup object.
 * \param address Pointer to a HebiMacAddress structure representing the
 * physical mac address of the given module (serves as unique id). Must not be
 * NULL.
 * \param timeout_ms Timeout in milliseconds.  A value of -1 blocks until
 * a module is found, and a value of 0 returns immediately if no module with
 * that address is currently known by the Lookup class.
 * \returns NULL if matching group not found in allotted time; pointer to newly
 * allocated group object otherwise.
 */
HebiGroupPtr hebiGroupCreateConnectedFromMac(HebiLookupPtr lookup, const HebiMacAddress* address, int32_t timeout_ms);

/**
 * \brief Create a group with all modules connected to module with the given name
 * and family
 *
 * Modules in group will be ordered depth-first, starting with the most proximal
 * module.
 *
 * Blocking call which waits to get a pointer to a Group object with the
 * given parameters.  Times out after timeout_msec milliseconds. Must be
 * released when use is complete via the hebiGroupRelease function.
 *
 * \param lookup A valid HebiLookup object.
 * \param name The given name of the key module, as viewable in the HEBI GUI.
 * Must be a null-terminated string, and must not be NULL.
 * \param family The given family of the key module, as viewable in the HEBI GUI.
 * Must be a null-terminated string, and must not be NULL.
 * \param timeout_ms Timeout in milliseconds.  A value of -1 blocks until
 * a module is found, and a value of 0 returns immediately if no module with
 * that address is currently known by the Lookup class.
 * \returns NULL if matching group not found in allotted time; pointer to newly
 * allocated group object otherwise.
 */
HebiGroupPtr hebiGroupCreateConnectedFromName(HebiLookupPtr lookup, const char* family, const char* name,
                                              int32_t timeout_ms);

/**
 * \brief Returns the number of modules in a group.
 *
 * \param group The group to send this command to.
 *
 * \returns the number of modules in the group.
 */
size_t hebiGroupGetSize(HebiGroupPtr group);

/**
 * \brief Sends a command to the given group, requesting an acknowledgement of
 * transmission to be sent back.
 *
 * Note: A non-HebiStatusSuccess return does not indicate a specific failure,
 * and may result from an error while sending or simply a timeout/dropped
 * response packet after a successful transmission.
 *
 * \param group The group to send this command to.
 * \param command The HebiGroupCommand object containing information to be sent to
 * the group.
 * \param timeout_ms Indicates how many milliseconds to wait for a response
 * after sending a packet.  For typical networks, '15' ms is a value that can be
 * reasonably expected to encompass the time required for a round-trip
 * transmission.
 *
 * \returns HebiStatusSuccess if an acknowledgement was successfully received (guaranteeing
 * the group received this command), or a failure code for an error otherwise.
 */
HebiStatusCode hebiGroupSendCommandWithAcknowledgement(HebiGroupPtr group, HebiGroupCommandPtr command,
                                                       int32_t timeout_ms);

/**
 * \brief Sends a command to the given group without requesting an
 * acknowledgement.
 *
 * Appropriate for high-frequency applications.
 *
 * \param group The group to send this command to.
 * \param command The HebiGroupCommand object containing information to be sent to
 * the group.
 *
 * \returns HebiStatusSuccess if the command was successfully sent, otherwise a failure code.
 */
HebiStatusCode hebiGroupSendCommand(HebiGroupPtr group, HebiGroupCommandPtr command);

/**
 * \brief Sets the command lifetime for the group, in milliseconds.
 *
 * The command lifetime is the duration for which a sent command remains active.
 * If the hardware does not receive further commands within the specified time
 * frame, all local controllers get deactivated. This is a safety feature to
 * mitigate the risk of accidents in case programs get interrupted in an unsafe
 * state, e.g., on program exceptions or during a network fault.
 *
 * Additionally, supporting hardware does not accept commands from any other
 * sources during the lifetime of a command. This mitigates the risk of other
 * users accidentally sending conflicting targets from, e.g., the GUI.
 *
 * \param group Which group the command lifetime is being set for.
 * \param lifetime_ms The number of milliseconds which the command 'lives' for.
 * Setting a value of '-1' sets infinite command lifetime, and setting '0'
 * disables command lifetime. When disabled, the hardware will continue to execute
 * the last sent command. Setting a value below -1 or above the accepted maximum will
 * return an error.
 *
 * \returns HebiStatusSuccess if command lifetime successfully set, or a failure code if
 * value was outside of accepted range (higher than supported maximum or below -1).
 */
HebiStatusCode hebiGroupSetCommandLifetime(HebiGroupPtr group, int32_t lifetime_ms);

/**
 * \brief Returns the current command lifetime, in milliseconds.
 *
 * \param group Which group is being queried.
 *
 * \returns The current command lifetime, in milliseconds. A value of '0' indicates
 * that commands remain active until the next command is received.
 */
int32_t hebiGroupGetCommandLifetime(HebiGroupPtr group);

/**
 * \brief Sets the feedback request loop frequency (in Hz).
 *
 * The group is queried for feedback in a background thread at this frequency,
 * and any added callbacks are called from this background thread.
 *
 * \param group Which group this frequency set is for.
 * \param frequency The feedback request loop frequency (in Hz). A value of '0'
 * is the default, and disables the feedback request thread.
 *
 * \returns HebiStatusSuccess if feedback frequency successfully set, or a failure code if
 * value was outside of accepted range (higher than supported maximum, NaN or negative).
 */
HebiStatusCode hebiGroupSetFeedbackFrequencyHz(HebiGroupPtr group, float frequency);

/**
 * \brief Returns the current feedback request loop frequency (in Hz).
 *
 * \param group Which group is being queried.
 *
 * \returns The current feedback request loop frequency (in Hz).
 */
float hebiGroupGetFeedbackFrequencyHz(HebiGroupPtr group);

/**
 * \brief Add a function that is called whenever feedback is returned from the
 * group.
 *
 * \param group The group to attach this handler to.
 * \param handler A feedback handling function called whenever feedback is
 * received from the group.
 * \param user_data A pointer to user data which will be returned as the second
 * callback argument. This pointer can be NULL if desired.
 */
HebiStatusCode hebiGroupRegisterFeedbackHandler(HebiGroupPtr group, GroupFeedbackHandlerFunction handler,
                                                void* user_data);

/**
 * \brief Removes all feedback handling functions from the queue to be called on
 * receipt of group feedback.
 *
 * \param group The group to which the handlers are attached.
 */
void hebiGroupClearFeedbackHandlers(HebiGroupPtr group);

/**
 * \brief Requests feedback from the group.
 *
 * Sends a background request to the modules in the group; if/when all modules
 * return feedback, any associated handler functions are called. This returned
 * feedback is also stored to be returned by the next call to
 * hebiGroupGetNextFeedback (any previously returned data is discarded).
 *
 * \param group The group to return feedback from.
 *
 * \returns HebiStatusSuccess if request was successfully sent, or a failure code if not
 * (i.e., connection error).
 */
HebiStatusCode hebiGroupSendFeedbackRequest(HebiGroupPtr group);

/**
 * \brief Returns the most recently stored feedback from a sent feedback
 * request, or returns the next one received (up to the requested timeout).
 *
 * Note that a feedback request can be sent either with the
 * hebiGroupSendFeedbackRequest function, or by setting a background feedback
 * frequency with hebiGroupSetFeedbackFrequencyHz.
 *
 * Warning: other data in the provided 'Feedback' object is erased!
 *
 * \param group The group to return feedback from.
 * \param feedback On success, the feedback read from the group are written
 * into this structure.
 * \param timeout_ms Indicates how many milliseconds to wait for feedback.
 * For typical networks, '15' ms is a value that can be reasonably expected to
 * allow for a round trip transmission after the last 'send feedback request'
 * call.
 *
 * \returns HebiStatusSuccess if feedback was returned, or a failure code if not
 * (i.e., connection error or timeout waiting for response).
 */
HebiStatusCode hebiGroupGetNextFeedback(HebiGroupPtr group, HebiGroupFeedbackPtr feedback, int32_t timeout_ms);

/**
 * \brief Requests info from the group, and writes it to the provided info
 * object.
 *
 * Warning: if successful, other data in the provided 'Info' object is erased!
 *
 * \param group The group to send this command to.
 * \param info On success, the info read from the group is written into this
 * structure.
 * \param timeout_ms Indicates how many milliseconds to wait for a response
 * after sending a packet.  For typical networks, '15' ms is a value that can be
 * reasonably expected to encompass the time required for a round-trip
 * transmission.
 *
 * \returns HebiStatusSuccess if info was received, or a failure code if not
 * (i.e., connection error or timeout waiting for response).
 */
HebiStatusCode hebiGroupRequestInfo(HebiGroupPtr group, HebiGroupInfoPtr info, int32_t timeout_ms);

/**
 * \brief Requests info from the group, and writes it to the provided info
 * object.  Specifically requests specific extra fields
 *
 * Warning: if successful, other data in the provided 'Info' object is erased!
 *
 * \param group The group to send this command to.
 * \param info On success, the info read from the group is written into this
 * structure.
 * \param extra_fields A bitfield of which extra fields to request.  Note that some
 * of these fields may significantly increase the packet size, and so it is not
 * recommended to call this at high rates. These use the HebiInfoExtraFields values, so
 * to request ethernet and user setting information, you would set extra_fields to
 * `((uint64_t)HebiInfoExtraFieldsEthernet) | ((uint64_t)HebiInfoExtraFielsUserSettings)`.
 * \param timeout_ms Indicates how many milliseconds to wait for a response
 * after sending a packet.  For typical networks, '15' ms is a value that can be
 * reasonably expected to encompass the time required for a round-trip
 * transmission.
 *
 * \returns HebiStatusSuccess if info was received, or a failure code if not
 * (i.e., connection error or timeout waiting for response).
 */
HebiStatusCode hebiGroupRequestInfoExtra(HebiGroupPtr group, HebiGroupInfoPtr info, uint64_t extra_fields, int32_t timeout_ms);

/**
 * \brief Sends a layout file to all group members, and requesting delivery acknowledgement.
 * Designed for use with Mobile IO devices, typically as the only group element.
 *
 * \param group The group containing the Mobile IO device to set the layout for. 
 * \param file The path to the file to load for reading contents from the group.
 * \param version_major The major component of the layout format version number.
 * \param version_minor The minor component of the layout format version number.
 * \param timeout_ms Indicates how many milliseconds to wait for a response
 * after sending a packet.  For typical networks, '15' ms is a value that can be
 * reasonably expected to encompass the time required for a round-trip
 * transmission.
 * \returns HebiStatusSuccess if layout was successfully sent and an acknowledgement
 * received; a failure code if not.  Note that this return code may change to include
 * failures separately if Mobile IO device rejects layout (currently unreported), if
 * file is not found, etc.
 */
HebiStatusCode hebiGroupSendLayout(HebiGroupPtr group, const char* file, int version_major, int version_minor, int32_t timeout_ms);

/**
 * \brief Sends a layout file to all group members, and requesting delivery acknowledgement.
 * Designed for use with Mobile IO devices, typically as the only group element.
 *
 * \param group The group containing the Mobile IO device to set the layout for. 
 * \param buffer A buffer containing the contents of the layout file.
 * \param buffer_size The number of bytes in the buffer.
 * \param version_major The major component of the layout format version number.
 * \param version_minor The minor component of the layout format version number.
 * \param timeout_ms Indicates how many milliseconds to wait for a response
 * after sending a packet.  For typical networks, '15' ms is a value that can be
 * reasonably expected to encompass the time required for a round-trip
 * transmission.
 * \returns HebiStatusSuccess if layout was successfully sent and an acknowledgement
 * received; a failure code if not.  Note that this return code may change to include
 * failures separately if Mobile IO device rejects layout (currently unreported), if
 * file is not found, etc.
 */
HebiStatusCode hebiGroupSendLayoutBuffer(HebiGroupPtr group, const char* buffer, size_t buffer_size, int version_major, int version_minor, int32_t timeout_ms);

/**
 * \brief Starts logging data to a file.
 *
 * Note: If a non null parameter is used for the returned string, and it is populated with a non null reference to a
 * string, it must be explicitly freed using @c hebiStringRelease(HebiStringPtr str)
 *
 * \param dir The relative or absolute path to the directory in which to log.
 * To use the current directory, pass in a null pointer
 * \param file The optional file name. If this is null, a name will be created using
 * the time at the moment which this function was invoked.
 * \param ret The optional pointer to a string reference. If this is null, this is ignored. Otherwise,
 * a reference to a string is populated with the path and name of the log file created. If this function does not
 * return HebiStatusSuccess and this parameter is not null, the value at this pointer is set to null.
 *
 * \returns HebiStatusSuccess if successfully started a log, a failure code otherwise.
 */
HebiStatusCode hebiGroupStartLog(HebiGroupPtr group, const char* dir, const char* file, HebiStringPtr* ret);

/**
 * @brief Adds a user log entry to a file.
 *
 * If no log is currently active, this function does nothing and returns a failure code.
 *
 * Note: The memory referenced by elements within `UserState` _must_ be valid for the duration of this function
 * call, but is not referenced after the call returns.
 *
 * \param group The group that is logging.
 * \param state The user state structure to log.  Entries within the struct that are `NULL` are ignored.
 *
 * \returns HebiStatusSuccess on success if something was added, a failure code otherwise.
 */
HebiStatusCode hebiGroupLogUserState(HebiGroupPtr group, HebiUserState state);

/**
 * \brief Stops logging data to a file.
 *
 * Note: This function allocates a log file structure on the heap, so make sure to release the pointer
 * returned by this function by calling @c hebiLogFileRelease(HebiLogFilePtr ptr)
 *
 * \param group The group that is logging.
 *
 * \returns a log file instance on success, otherwise a null pointer.
 */
HebiLogFilePtr hebiGroupStopLog(HebiGroupPtr group);

/**
 * \brief Release resources for a given group; group should not be used after
 * this call.
 *
 * \param group A valid HebiGroup object.
 */
void hebiGroupRelease(HebiGroupPtr group);

/**
 * \brief Creates a GroupCommand for a group with the specified number of
 * modules.
 *
 * \param size The number of modules in the group.
 *
 * \returns A pointer to a new GroupCommand object. This must be released
 * with \c hebiGroupCommandRelease(HebiGroupCommandPtr).
 */
HebiGroupCommandPtr hebiGroupCommandCreate(size_t size);

/**
 * \brief Return the number of modules in this group Command.
 *
 * \returns The number of module commands in this group command.
 */
size_t hebiGroupCommandGetSize(HebiGroupCommandPtr command);

/**
 * \brief Import gains from a file into a GroupCommand object.
 *
 * \param file A null-terminated string that gives the path/filename of the
 * gains XML file. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the file could
 * note be opened or read.
 * In particular:
 *  - if the file was successfully read, but the number of modules in the file
 *    is not equal to '1' or the size of the group, returns
 *    HebiStatusInvalidArgument.
 *  - if file is NULL, returns HebiStatusInvalidArgument.
 *  - for other parsing errors, may return HebiStatusFailure or
 *    HebiStatusInvalidArgument.
 */
HebiStatusCode hebiGroupCommandReadGains(HebiGroupCommandPtr command, const char* file);

/**
 * \brief Export gains from a GroupCommand object into a file.
 *
 * \param file A null-terminated string that gives the path/filename to save the
 * gains XML file at. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the file could
 * not be written to or an internal error occurs.
 */
HebiStatusCode hebiGroupCommandWriteGains(HebiGroupCommandPtr command, const char* file);

/**
 * \brief Copy gains from a GroupInfo object into a GroupCommand object.
 *
 * \param src The GroupInfo to read the gains from.  Must be either length one or equal to the
 * length of the GroupCommand destination.
 * \param dest The GroupCommand to write the gains into.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the sizes do not match requirements
 * or an internal error occurs.
 */
HebiStatusCode hebiGroupCommandCopyGainsFromInfo(HebiGroupCommandPtr dest, HebiGroupInfoPtr src);

/**
 * \brief Copy gains from a GroupCommand object into a GroupCommand object.
 *
 * \param src The GroupCommand to read the gains from.  Must be either length one or equal to the
 * length of the GroupCommand destination.
 * \param dest The GroupCommand to write the gains into.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the sizes do not match requirements
 * or an internal error occurs.
 */
HebiStatusCode hebiGroupCommandCopyGainsFromCommand(HebiGroupCommandPtr dest, HebiGroupCommandPtr src);

/**
 * \brief Copy gains from a module Info object into a module Command object.
 *
 * \param src The Info to read the gains from.
 * \param dest The Command to write the gains into.
 *
 * \returns HebiStatusSuccess on success, or a failure code if an internal error occurs.
 */
HebiStatusCode hebiCommandCopyGainsFromInfo(HebiCommandPtr dest, HebiInfoPtr src);

/**
 * \brief Copy gains from a module Command object into a module Command object.
 *
 * \param src The Command to read the gains from.
 * \param dest The Command to write the gains into.
 *
 * \returns HebiStatusSuccess on success, or a failure code if an internal error occurs.
 */
HebiStatusCode hebiCommandCopyGainsFromCommand(HebiCommandPtr dest, HebiCommandPtr src);

/**
 * \brief Import safety parameters from a file into a GroupCommand object.
 *
 * \param file A null-terminated string that gives the path/filename of the
 * safety parameters XML file. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the file could
 * note be opened or read.
 * In particular:
 *  - if the file was successfully read, but the number of modules in the file
 *    is not equal to '1' or the size of the group, returns
 *    HebiStatusInvalidArgument.
 *  - if file is NULL, returns HebiStatusInvalidArgument.
 *  - for other parsing errors, may return HebiStatusFailure or
 *    HebiStatusInvalidArgument.
 */
HebiStatusCode hebiGroupCommandReadSafetyParameters(HebiGroupCommandPtr command, const char* file);

/**
 * \brief Export safety parameters from a GroupCommand object into a file.
 *
 * \param file A null-terminated string that gives the path/filename to which
 * the safety parameters will be saved. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the file could
 * not be written to or an internal error occurs.
 */
HebiStatusCode hebiGroupCommandWriteSafetyParameters(HebiGroupCommandPtr command, const char* file);

/**
 * \brief Get an individual command for a particular module at index
 * \c module_index.
 *
 * \param module_index The index to retrieve the module command; must be
 * from 0 to the size - 1, inclusive, or results in undefined behavior.
 *
 * \returns The command corresponding to the module at index \c module_index.
 */
HebiCommandPtr hebiGroupCommandGetModuleCommand(HebiGroupCommandPtr command, size_t module_index);

/**
 * \brief Clears the `dest` GroupCommand object, and copies all data from the
 * `src` GroupCommand object to `dest`.
 *
 * The GroupCommand objects should have identical state after this.
 *
 * \param dest The GroupCommandPtr to copy data into. The previous state of
 * this object will be cleared.
 * \param src The GroupCommandPtr to copy data from. This object will remain
 * unchanged.
 *
 * \return HebiStatusSuccess if the operation succeeds; HebiStatusInvalidArgument
 * if the sizes of the two messages do not match; HebiStatusError for any other
 * error.
 */
HebiStatusCode hebiGroupCommandCopy(HebiGroupCommandPtr dest, HebiGroupCommandPtr src);

/**
 * \brief Clears all data in the GroupCommand object.
 */
void hebiGroupCommandClear(HebiGroupCommandPtr command);

/**
 * \brief Frees resources created by the GroupCommand object.
 *
 * The GroupCommandPtr must not be used after this function is called.
 */
void hebiGroupCommandRelease(HebiGroupCommandPtr command);

/**
 * \brief Creates a GroupFeedback for a group with the specified number of
 * modules.
 *
 * \param size The number of modules in the group.
 *
 * \returns A pointer to a new GroupFeedback object. This must be released
 * with \c hebiGroupFeedbackRelease(HebiGroupFeedbackPtr).
 */
HebiGroupFeedbackPtr hebiGroupFeedbackCreate(size_t size);

/**
 * \brief Return the number of modules in this group Feedback.
 *
 * \returns The number of module feedbacks in this group feedback.
 */
size_t hebiGroupFeedbackGetSize(HebiGroupFeedbackPtr feedback);

/**
 * \brief Get an individual feedback for a particular module at index
 * \c module_index.
 *
 * \param module_index The index to retrieve the module feedback; must be
 * from 0 to the size - 1, inclusive, or results in undefined behavior.
 *
 * \returns The feedback corresponding to the module at index \c module_index.
 */
HebiFeedbackPtr hebiGroupFeedbackGetModuleFeedback(HebiGroupFeedbackPtr feedback, size_t module_index);

/**
 * \brief Clears the `dest` GroupFeedback object, and copies all data from the
 * `src` GroupFeedback object to `dest`.
 *
 * The GroupFeedback objects should have identical state after this.
 *
 * \param dest The GroupFeedbackPtr to copy data into. The previous state of
 * this object will be cleared.
 * \param src The GroupFeedbackPtr to copy data from. This object will remain
 * unchanged.
 *
 * \return HebiStatusSuccess if the operation succeeds; HebiStatusInvalidArgument
 * if the sizes of the two messages do not match; HebiStatusError for any other
 * error.
 */
HebiStatusCode hebiGroupFeedbackCopy(HebiGroupFeedbackPtr dest, HebiGroupFeedbackPtr src);

/**
 * \brief Clears all data in the GroupFeedback object.
 */
void hebiGroupFeedbackClear(HebiGroupFeedbackPtr feedback);

/**
 * \brief Frees resources created by the GroupFeedback object.
 *
 * The GroupFeedbackPtr must not be used after this function is called.
 */
void hebiGroupFeedbackRelease(HebiGroupFeedbackPtr feedback);

/**
 * \brief Creates a GroupInfo for a group with the specified number of
 * modules.
 *
 * \param size The number of modules in the group.
 *
 * \returns A pointer to a new GroupInfo object. This must be released
 * with \c hebiGroupInfoRelease(HebiGroupInfoPtr).
 */
HebiGroupInfoPtr hebiGroupInfoCreate(size_t size);

/**
 * \brief Return the number of modules in this group Info.
 *
 * \returns The number of module infos in this group info.
 */
size_t hebiGroupInfoGetSize(HebiGroupInfoPtr info);

/**
 * \brief Export gains from a GroupInfo object into a file.
 *
 * \param file A null-terminated string that gives the path/filename to save the
 * gains XML file at. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the file could
 * not be written to or an internal error occurs.
 */
HebiStatusCode hebiGroupInfoWriteGains(HebiGroupInfoPtr info, const char* file);

/**
 * \brief Export safety parameters from a GroupInfo object into a file.
 *
 * \param file A null-terminated string that gives the path/filename to which
 * the safety parameters will be saved. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or a failure code if the file could
 * not be written to or an internal error occurs.
 */
HebiStatusCode hebiGroupInfoWriteSafetyParameters(HebiGroupInfoPtr info, const char* file);

/**
 * \brief Get an individual info for a particular module at index
 * \c module_index.
 *
 * \param module_index The index to retrieve the module info; must be
 * from 0 to the size - 1, inclusive, or results in undefined behavior.
 *
 * \returns The info corresponding to the module at index \c module_index.
 */
HebiInfoPtr hebiGroupInfoGetModuleInfo(HebiGroupInfoPtr info, size_t module_index);

/**
 * \brief Clears the `dest` GroupInfo object, and copies all data from the
 * `src` GroupInfo object to `dest`.
 *
 * The GroupInfo objects should have identical state after this.
 *
 * \param dest The GroupInfoPtr to copy data into. The previous state of
 * this object will be cleared.
 * \param src The GroupInfoPtr to copy data from. This object will remain
 * unchanged.
 *
 * \return HebiStatusSuccess if the operation succeeds; HebiStatusInvalidArgument
 * if the sizes of the two messages do not match; HebiStatusError for any other
 * error.
 */
HebiStatusCode hebiGroupInfoCopy(HebiGroupInfoPtr dest, HebiGroupInfoPtr src);

/**
 * \brief Clears all data in the GroupInfo object.
 */
void hebiGroupInfoClear(HebiGroupInfoPtr info);

/**
 * \brief Frees resources created by the GroupInfo object.
 *
 * The GroupInfoPtr must not be used after this function is called.
 */
void hebiGroupInfoRelease(HebiGroupInfoPtr info);

////////////////////////////////////////////////////////////////////////////////
/// Command API
////////////////////////////////////////////////////////////////////////////////

/**
 * Retrieves the value and/or the length of the string field.
 *
 * If this string is not set in the Command, HebiStatusValueNotSet is
 * returned (regardless of any other arguments) and any pointer values are
 * unchanged.
 *
 * If 'length' is NULL, returns HebiStatusValueSuccess if this string value is
 * set (the value of 'buffer' is ignored in this case).
 *
 * If 'buffer' is not NULL, then 'length' should be non-NULL and set to the
 * number of characters that can be written to 'buffer'. If the specified string
 * is set, and it can fit into the provided buffer (including a null terminating
 * character), then the string is copied to 'buffer' and HebiStatusSuccess is
 * returned. If the buffer is not large enough to contain the string, then
 * HebiStatusBufferTooSmall is returned.
 *
 * If 'buffer' is NULL, returns HebiStatusValueSuccess if this string value is
 * set.
 *
 * If 'length' is not NULL (regardless of the state of 'buffer'), it is set to
 * the necessary size to hold the specified string value (including the null
 * terminating character).
 *
 * Note - assumes ASCII string encoding.
 */
HebiStatusCode hebiCommandGetString(HebiCommandPtr command, HebiCommandStringField field, char* buffer, size_t* length);

/**
 * Sets the given string to the value given in the buffer (if given). If any of
 * the provided pointers are null, the field is cleared.
 *
 * If not NULL, 'length' should be set to the length of the c-style string in
 * 'buffer', without including the terminating null character. The data in
 * 'buffer' does not need to be null terminated.
 *
 * Note - assumes ASCII string encoding.
 */
void hebiCommandSetString(HebiCommandPtr command, HebiCommandStringField field, const char* buffer,
                          const size_t* length);

/**
 * Retrieves the value and/or the length of the label for the given IO pin.
 *
 * "pin_number" is a 1-based index into the pins in the given bank; must be between
 * 1 and 8.
 *
 * See hebiCommandGetString for details.
 */
HebiStatusCode hebiCommandGetIoLabelString(HebiCommandPtr command, HebiCommandIoPinBank bank, int pin_number,
                                           char* buffer, size_t* length);

/**
 * Sets the given IO pin label to the value given in the buffer (if given). If any
 * of the provided pointers are null, the field is cleared.
 *
 * "pin_number" is a 1-based index into the pins in the given bank; must be between
 * 1 and 8.
 *
 * See hebiCommandSetString for details.
 */
HebiStatusCode hebiCommandSetIoLabelString(HebiCommandPtr command, HebiCommandIoPinBank bank, int pin_number,
                                           const char* buffer, const size_t* length);

/**
 * Retrieves a reference of the Command instance for direct access of fields
 */
void hebiCommandGetReference(HebiCommandPtr command, HebiCommandRef* ref);

/**
 * Retrieve the (constant) size of the Command structure; useful for striding over the structure directly in some
 * languates
 * 
 * @return DLL_PUBLIC 
 */
size_t hebiCommandGetSize();

/**
 * Retrieve the static metadata for all Command instances
 */
void hebiCommandGetMetadata(HebiCommandMetadata* metadata);

////////////////////////////////////////////////////////////////////////////////
/// Feedback API
////////////////////////////////////////////////////////////////////////////////


/**
 * Retrieves a reference of the Feedback instance for direct access of fields
 */
void hebiFeedbackGetReference(HebiFeedbackPtr feedback, HebiFeedbackRef* ref);

/**
 * Retrieve the (constant) size of the Feedback structure; useful for striding over the structure directly in some
 * languates
 * 
 * @return DLL_PUBLIC 
 */
size_t hebiFeedbackGetSize();

/**
 * Retrieve the static metadata for all Feedback instances
 */
void hebiFeedbackGetMetadata(HebiFeedbackMetadata* metadata);

////////////////////////////////////////////////////////////////////////////////
/// Info API
////////////////////////////////////////////////////////////////////////////////

/**
 * Retrieves the value and/or the length of the string field.
 *
 * If this string is not set in the Info, HebiStatusValueNotSet is
 * returned (regardless of any other arguments) and any pointer values are
 * unchanged.
 *
 * If 'length' is NULL, returns HebiStatusValueSuccess if this string value is
 * set (the value of 'buffer' is ignored in this case).
 *
 * If 'buffer' is not NULL, then 'length' should be non-NULL and set to the
 * number of characters that can be written to 'buffer'. If the specified string
 * is set, and it can fit into the provided buffer (including a null terminating
 * character), then the string is copied to 'buffer' and HebiStatusSuccess is
 * returned. If the buffer is not large enough to contain the string, then
 * HebiStatusBufferTooSmall is returned.
 *
 * If 'buffer' is NULL, returns HebiStatusValueSuccess if this string value is
 * set.
 *
 * If 'length' is not NULL (regardless of the state of 'buffer'), it is set to
 * the necessary size to hold the specified string value (including the null
 * terminating character).
 *
 * Note - assumes ASCII string encoding.
 */
HebiStatusCode hebiInfoGetString(HebiInfoPtr info, HebiInfoStringField field, char* buffer, size_t* length);

/**
 * Retrieves the value and/or the length of the label for the given IO pin.
 *
 * "pin_number" is a 1-based index into the pins in the given bank; must be between
 * 1 and 8.
 *
 * See hebiCommandGetString for details.
 */
HebiStatusCode hebiInfoGetIoLabelString(HebiInfoPtr command, HebiInfoIoPinBank bank, int pin_number, char* buffer,
                                        size_t* length);

/**
 * Retrieves a reference of the Info instance for direct access of fields
 */
void hebiInfoGetReference(HebiInfoPtr info, HebiInfoRef* ref);

/**
 * Retrieve the (constant) size of the Info structure; useful for striding over the structure directly in some
 * languates
 * 
 * @return DLL_PUBLIC 
 */
size_t hebiInfoGetSize();

/**
 * Retrieve the static metadata for all Info instances
 */
void hebiInfoGetMetadata(HebiInfoMetadata* metadata);

////////////////////////////////////////////////////////////////////////////////
/// RobotModel API
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Creates a one-dof joint about the specified axis.
 *
 * \param joint_type What the axis of motion for this joint is. The coordinate
 * frame is relative to the previous robot model element this is attached to.
 *
 * \returns NULL if the joint could not be created; otherwise, pointer
 * to newly allocated joint.  Must either be added to a robot model object or
 * released via hebiRobotModelElementRelease(HebiRobotModelElementPtr).
 */
HebiRobotModelElementPtr hebiRobotModelElementCreateJoint(HebiJointType joint_type);

/**
 * \brief Creates a rigid body defining static transforms to the given outputs.
 *
 * \param com Matrix (4x4 tranform) for the center of mass location, including
 * the frame which the inertia tensor is given in. Must not be NULL.
 * \param inertia Vector (6 elements, Ixx, Iyy, Izz, Ixy, Ixz, Iyz) of the
 * inertia tensor, in the frame given by the COM. Must not be NULL.
 * \param mass Mass (in kg) of the rigid body.
 * \param num_outputs The number of available outputs.
 * \param outputs Matrices (list of n 4x4 transforms) of the transforms from
 * input to the available outputs of the body. Must not be NULL unless
 * num_outputs is 0.
 * \param ordering How the data in `com` and `outputs` should be serialized.
 *
 * NOTE: currently, num_outputs must be 1.
 *
 * \returns NULL if the rigid body could not be created; otherwise, pointer to
 * newly allocated body.  Must either be added to a robot model object or
 * released via 'hebiRobotModelElementRelease'.
 */
HebiRobotModelElementPtr hebiRobotModelElementCreateRigidBody(const double* com, const double* inertia, double mass,
                                                              size_t num_outputs, const double* outputs,
                                                              HebiMatrixOrdering ordering);

/**
 * \brief Creates a robot model element corresponding to a standard HEBI end
 * effector, or a custom end effector defining static transforms to the given
 * outputs.
 *
 * \param end_effector_type The support end effector type from the HEBI
 * component library, as given by the HebiEndEffectorType enum. If "Custom" is
 * not given, then mass, center of mass, inertia, and output frame are ignored.
 *
 * \param com Matrix (4x4 tranform) for the center of mass location, including
 * the frame which the inertia tensor is given in. Only used if
 * end_effector_type is Custom; defaults to (0,0,0) if NULL.
 * \param inertia Vector (6 elements, Ixx, Iyy, Izz, Ixy, Ixz, Iyz) of the
 * inertia tensor, in the frame given by the COM. Only used if end_effector_type
 * is Custom; defaults to point mass (all elements 0) if NULL.
 * \param mass Mass (in kg) of the rigid body. Only used if end_effector_type is
 * Custom.
 * \param output_frame A matrix (4x4 transform) from the input to the available
 * frames of the end effector. Only used if end_effector_type is Custom;
 * defaults to identity if NULL.
 * \param ordering How the data in `com` and `output_frame` should be serialized.
 *
 * \returns NULL if the rigid body could not be created; otherwise, pointer to
 * newly allocated body.  Must either be added to a robot model object or
 * released via 'hebiRobotModelElementRelease'.
 */
HebiRobotModelElementPtr hebiRobotModelElementCreateEndEffector(HebiEndEffectorType end_effector_type,
                                                                const double* com, const double* inertia,
                                                                double mass, const double* output_frame,
                                                                HebiMatrixOrdering ordering);

/**
 * \brief Creates a robot model element corresponding to a standard HEBI actuator.
 *
 * \param actuator_type The supported actuator type from the HEBI component
 * library, as given by the HebiActuatorType enum.
 *
 * \returns NULL if the actuator could not be created; otherwise, pointer to
 * newly allocated element.  Must either be added to a robot model object or
 * released via 'hebiRobotModelElementRelease'.
 */
HebiRobotModelElementPtr hebiRobotModelElementCreateActuator(HebiActuatorType actuator_type);

/**
 * \brief Creates a rigid body, including mass and static transforms,
 * corresponding to a standard HEBI bracket.
 *
 * \param bracket_type The supported bracket type from the HEBI component
 * library, as given by the HebiBracketType enum.
 *
 * \returns NULL if the rigid body could not be created; otherwise, pointer to
 * newly allocated body.  Must either be added to a robot model object or
 * released via 'hebiRobotModelElementRelease'.
 */
HebiRobotModelElementPtr hebiRobotModelElementCreateBracket(HebiBracketType bracket_type);

/**
 * \brief Creates a rigid body, including mass and static transforms,
 * corresponding to a standard HEBI link.
 *
 * \param link_type The supported link type from the HEBI component
 * library, as given by the HebiLinkType enum.
 * \param input_type The supported link input style, as given by the
 * HebiLinkInputType enum.
 * \param output_type The supported link output style, as given by the
 * HebiLinkOutputType enum.
 * \param extension The z-axis to z-axis input to output distance, as defined
 * at docs.hebi.us.
 * \param twist Rotation (in radians) about the extension axis, as defined at
 * docs.hebi.us.
 *
 * \returns NULL if the rigid body could not be created; otherwise, pointer to
 * newly allocated body.  Must either be added to a robot model object or
 * released via 'hebiRobotModelElementRelease'.
 */
HebiRobotModelElementPtr hebiRobotModelElementCreateLink(HebiLinkType link_type, HebiLinkInputType input_type,
                                                         HebiLinkOutputType output_type, double extension,
                                                         double twist);

/**
 * \brief Frees resources created by this element.
 *
 * Note: Only do this if element has not been added to a robot model object!
 * Once added, the robot model object manages the element's resources.
 *
 * The element should no longer be used after this function is called.
 *
 * \param A valid robot model element object which has not been added to a
 * robot_model object.
 */
void hebiRobotModelElementRelease(HebiRobotModelElementPtr element);

/**
 * \brief Import robot model from a file into a RobotModel object.
 *
 * \param file A null-terminated string that gives the path/filename of the
 * robot model XML file (HRDF). Must not be NULL. The format of this file is
 * documented at docs.hebi.us.
 *
 * \returns A HebiRobotModelPtr on success, or NULL if the file could not be
 * opened or read.  In the case that NULL is returned, an error message is set
 * that is retrievable via hebiRobotModelGetImportError.  This saved error
 * message is thread-safe, and is available until hebiRobotModelImport is called
 * again on this thread.  In the case that a non-NULL object is returned, this
 * must be released with 'hebiRobotModelRelease' when no longer needed.
 */
HebiRobotModelPtr hebiRobotModelImport(const char* file);

/**
 * \brief Import robot model from a buffer into a RobotModel object.
 *
 * \param buffer A buffer of the text content of an robot model XML file (HRDF).
 * Must not be NULL. The format of this file is documented at docs.hebi.us.
 * \param buffer_size The length of the above buffer.  The buffer does not need
 * to be null terminated, and as such this buffer_size should not include any
 * null terminating characters.
 *
 * \returns A HebiRobotModelPtr on success, or NULL if the file could not be
 * parsed.  In the case that NULL is returned, an error message is set that is
 * retrievable via hebiRobotModelGetImportError.  This saved error message is
 * thread-safe, and is available until hebiRobotModelImport is called again on
 * this thread.  In the case that a non-NULL object is returned, this must be
 * released with 'hebiRobotModelRelease' when no longer needed.
 */
HebiRobotModelPtr hebiRobotModelImportBuffer(const char* buffer, size_t buffer_size);

/**
 * \brief Retrieve any error string from the last call to hebiRobotModelImport.
 * This must be called on the same thread as the call to hebiRobotModelImport.
 *
 * \returns A null-terminated ASCII character array with a human readable error
 * message describing the failure.  This array is valid until the next call to
 * 'hebiRobotModelImport' on this thread; accessing the array after that call
 * is undefined behavior.
 */
const char* hebiRobotModelGetImportError();

/**
 * \brief Retrieve the number of warnings corresponding to the last call to
 * hebiRobotModelImport. This must be called on the same thread as the call to
 * hebiRobotModelImport.
 *
 * \returns The number of recoverable warnings encountered when importing the
 * file.
 */
size_t hebiRobotModelGetImportWarningCount();

/**
 * \brief Retrieve the 'ith' warning string from the last call to
 * hebiRobotModelImport. This must be called on the same thread as the call to
 * hebiRobotModelImport.
 *
 * \param warning_index The 0-based index of the warning to retrieve.  Must be
 * in the range [0, `hebiRobotModelGetImportWarningCount`), or NULL will be
 * returned.
 *
 * \returns A null-terminated ASCII character array with a human readable error
 * message describing the failure.  This array is valid until the next call to
 * 'hebiRobotModelImport' on this thread; accessing the array after that call
 * is undefined behavior.
 */
const char* hebiRobotModelGetImportWarning(size_t warning_index);

/**
 * \brief Creates an object to hold a robot model (tree topology). This
 * structure has a single output available at the origin.
 *
 * RobotModel object created by this function must be released with
 * 'hebiRobotModelRelease' when no longer needed.
 */
HebiRobotModelPtr hebiRobotModelCreate(void);

/**
 * \brief Creates a HebiRobotModelPtr that is a sub-tree of another
 * HebiRobotModelPtr, beginning at a given element (as defined by a)
 * depth-first traversal of the original model). The created subtree is linked
 * to the original model, and so kinematics and IK operations are not
 * thread-safe if the original model and subtree are accessed from different
 * threads.  However, the lifetimes can be treated as independent from the API
 * perspective, as the linked objects are internally reference counted.
 * Therefore you can safely call `hebiRobotModelRelease` on the original model
 * while the subtree is still being used.
 *
 * RobotModel object created by this function must be released with
 * 'hebiRobotModelRelease' when no longer needed.
 *
 * \param model The original model that this subtree is taken from.
 * \param element_index The index of the HebiRobotModelElementPtr, using a
 * depth-first tree traversal, of the element that becomes the root of the
 * new robot model object.
 * \returns RobotModel object representing a subtree starting at the given
 * index, or NULL if the original model is invalid or the element_index is
 * not valid for this robot model.
 */
HebiRobotModelPtr hebiRobotModelCreateSubtreeFromElement(HebiRobotModelPtr model, int element_index);

/**
 * \brief Sets the fixed transform from the origin to the input of the first
 * added model element.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param transform A 4x4 homogeneous transform. Must not be null, and must be
 * a valid transform.
 * \param ordering How the data in `transform` should be serialized.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * transform is null or invalid.
 */
HebiStatusCode hebiRobotModelSetBaseFrame(HebiRobotModelPtr robot_model, const double* transform,
                                          HebiMatrixOrdering ordering);

/**
 * \brief Retreives the fixed transform from the origin to the input of the
 * first added model element.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param transform A allocated 16 element array of doubles; this is filled
 * in by the function with the 4x4 homogeneous transform. Must not be NULL.
 * \param ordering How the data in `transform` should be serialized.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * transform is null.
 */
HebiStatusCode hebiRobotModelGetBaseFrame(HebiRobotModelPtr robot_model, double* transform,
                                          HebiMatrixOrdering ordering);

/**
 * \brief Return the number of frames in the forward kinematic tree of the robot
 * model.
 *
 * Note that this depends on the type of frame requested -- for center of mass
 * frames, there is one per added rigid body (that was not combined with
 * another); for output frames, there is one per output per element.  For end
 * effectors, this is the total number of outputs on the leaves of the kinematic
 * tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param frame_type Which type of frame to consider -- see HebiFrameType enum.
 */
size_t hebiRobotModelGetNumberOfFrames(HebiRobotModelPtr robot_model, HebiFrameType frame_type);

/**
 * \brief Returns the number of settable degrees of freedom in the kinematic
 * tree. (This is equal to the number of joints added).
 *
 * \param robot_model A valid HEBI RobotModel object.
 */
size_t hebiRobotModelGetNumberOfDoFs(HebiRobotModelPtr robot_model);

/**
 * \brief Returns the number of elements added to the kinematic
 * tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 */
size_t hebiRobotModelGetNumberOfElements(HebiRobotModelPtr robot_model);

/**
 * \brief Retrieves metadata about an element in the robot model. This
 * metadata includes what type of element this is, and per-element-type
 * information.
 *
 * There is one "metadata" object for each element in the robot model.
 *
 * \param model The robot model pointer to query.
 * \param index The index of the element in the robot model; this corresponds
 * to the "robot model element" frame with the same index. Within a subtree, this
 * corresponse to the element index relative to that subtree (e.g., 0 is the root
 * of the subtree).
 * \param output This should be a HebiRobotModelElementMetadata structure, and
 * cannot be NULL.
 *
 * \return On success, HebiStatusSuccess will be returned. If "model" or "output"
 * is NULL, then HebiStatusInvalidArgument will be returned.  If the index does
 * not exist in this robot model, then HebiStatusArgumentOutOfRange will be
 * returned.
 */
HebiStatusCode hebiRobotModelGetElementMetadata(HebiRobotModelPtr model, size_t index, HebiRobotModelElementMetadata* output);

/**
 * Gets the path of a mesh corresponding with the index of a mesh frame.  Must be a valid
 * index.
 *
 * To only query the length of the string, provide a null pointer for the buffer parameter.
 * If the provided buffer is not large enough to hold the string (the length determined by the length parameter),
 * the call will fail. Note that the size of this buffer includes the null
 * terminating character.
 *
 * Note - assumes utf-8 string encoding.
 *
 * \param model A valid HebiRobotModel object.
 * \param index The index within the list of mesh frames of the object corresponding with this mesh.
 * \param buffer An allocated buffer of length 'length'
 * \param length the length of the provided buffer. After calling this function, the value dereferenced will be
 * updated with the length of the string plus the null character. This argument must not be NULL.
 *
 * \returns HebiStatusSuccess on success, HebiStatusBufferTooSmall if the provided buffer is too small,
 * HebiStatusInvalidArgument if the length parameter is null, or HebiStatusArgumentOutOfRange if the index is
 * invalid.
 */
HebiStatusCode hebiRobotModelGetMeshPath(HebiRobotModelPtr model, size_t index, char* buffer,
                                         size_t* length);

/**
 * Get the index of an element in the RobotModel with the given tag. On success, `index_out` is set
 * to the index value.
 *
 * \param model A valid HebiRobotModel object.
 * \param tag_utf8 A utf-8 encoded tag to search for.  Does not need to be null terminated; must be
 * at least 'tag_len' long.
 * \param tag_len The length of the tag_utf8 string to be checked.  In bytes, not utf8 characters.
 * \param index_out On success, the index of the robot model element with this tag is written to this
 * variable.
 *
 * \returns HebiStatusSuccess on success, HebiStatusInvalidArgument if parameters are null, or
 * HebiStatusArgumentOutOfRange if the tag is not found.
 */
HebiStatusCode hebiRobotModelGetElementIndexFromTag(HebiRobotModelPtr model, const char* tag_utf8,
                                                    size_t tag_len, size_t* index_out);

/**
 * \brief Add an element to a parent element connected to a robot model object.
 *
 * After the addition, the robot model object manages the resources of the added
 * element.  On failure, the passed in 'new_element' argument is properly
 * disposed by this function.
 *
 * The added element is assumed to connect to an available output on a element
 * that has already been attached to the kinematic tree. That element should be
 * passed in as 'existing_element', and the index of the requested output on
 * that element should be given as 'output_index'.
 *
 * To attach the initial element to the robot model object, use NULL for the
 * 'existing_element' argument.
 *
 * NOTE: currently, only a single output is supported for each element (e.g., a
 * kinematic chain), and so the 'existing_element' and 'output_index' parameters
 * are not checked; this will be changed in an upcoming minor release so do not
 * rely on this behavior!
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param existing_element The parent element which the element is added to (or
 * NULL to add the initial element to the tree).
 * \param output_index The index of the requested output on the parent element
 * on which to attach this element.
 * \param new_element The kinematic element which is added to the tree. Must not
 * be NULL.
 * \param combine Whether or not to combine this with the output frame where
 * this is being attached to, essentially "hiding" this existing output frame
 * from returned frames and replacing it with the output from this.  Body masses
 * and inertias are also combined. '1' means combine; '0' means do not combine.
 *
 * \returns HebiStatusSuccess on success, otherwise HebiStatusFailure (e.g., the
 * parent body's requested output is invalid or already occupied) or
 * HebiStatusInvalidArgument (e.g., 'new_element' is NULL).
 */
HebiStatusCode hebiRobotModelAdd(HebiRobotModelPtr robot_model, HebiRobotModelElementPtr existing_element,
                                 size_t output_index, HebiRobotModelElementPtr new_element);

/**
 * \brief Generates the transforms for the forward kinematics of the given
 * robot model.
 *
 * The order of the returned frames is in a depth-first tree. As an example,
 * assume an element A has one output, to which element B is connected to.
 * Element B has two outputs; C is attached to the first output and E is
 * attached to the second output. Element D is attached to the only output of
 * element C:
 *
 * (BASE) A - B(1) - C - D
 *           (2)
 *            |
 *            E
 *
 * For center of mass frames, the returned frames would be A-B-C-D-E.
 *
 * For output frames, the returned frames would be A-B(1)-C-D-B(2)-E.
 *
 * For end effector frames, the returned frames are the outputs of the leaf
 * nodes; here the output of D and E.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param frame_type Which type of frame to consider -- see HebiFrameType enum.
 * \param positions A vector of joint positions/angles (in SI units of meters or
 * radians) equal in length to the number of DoFs of the robot model. Must not
 * be NULL, unless there are zero DoFs in the robot model.
 * \param frames An allocated (16 x number of frames) array of doubles; this is
 * filled in by the function with the 4x4 homogeneous transform of each frame.
 * Note that the number of frames depends on the frame type! Must not be NULL.
 * \param ordering How the data in `frames` should be serialized.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * positions or frames are NULL.
 */
HebiStatusCode hebiRobotModelGetForwardKinematics(HebiRobotModelPtr robot_model, HebiFrameType frame_type,
                                                  const double* positions, double* frames, HebiMatrixOrdering ordering);

/**
 * \brief Generates the jacobian for each frame in the given kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param frame_type Which type of frame to consider -- see HebiFrameType enum.
 * \param positions A vector of joint positions/angles (in SI units of meters or
 * radians) equal in length to the number of DoFs of the robot model. Must not
 * be NULL.
 * \param jacobians An allocated (6 x number of dofs x number of frames) array
 * of doubles; this is filled in by the function with the 6 x number of dofs
 * jacobian for each frame.  Note that the number of frames depends on the frame
 * type! Must not be NULL.
 * \param ordering How the data in `jacobians` should be serialized.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * positions or jacobians are NULL.
 */
HebiStatusCode hebiRobotModelGetJacobians(HebiRobotModelPtr robot_model, HebiFrameType frame_type,
                                          const double* positions, double* jacobians, HebiMatrixOrdering ordering);

/**
 * \brief Fill in the payloads vector with the mass of payload attached to each
 * end effector in the kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param payloads An allocated array of doubles, with length equal to the return
 * value of hebiRobotModelGetNumberOfFrames with argument
 * HebiFrameTypeEndEffector. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model or payloads is NULL.
 */
HebiStatusCode hebiRobotModelGetEndEffectorPayloads(HebiRobotModelPtr robot_model, double* payloads);

/**
 * \brief Get the payload mass of a specific end effector in the kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param index The index of the end effector.
 * \param payload A pointer to a double where the payload mass will be stored.
 *
 * \returns HebiStatusSuccess on success, HebiStatusArgumentOutOfRange if the
 * index is out of range, or HebiStatusInvalidArgument if robot_model or payload
 * is NULL.
 */
HebiStatusCode hebiRobotModelGetEndEffectorPayload(HebiRobotModelPtr robot_model, size_t index, double* payload);

/**
 * \brief Set the mass of payload for each end effector in the kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param payloads An array of doubles, with length equal to the return
 * value of hebiRobotModelGetNumberOfFrames with argument
 * HebiFrameTypeEndEffector. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model is NULL, payloads is NULL or if payloads does not contain
 * finite values.
 */
HebiStatusCode hebiRobotModelSetEndEffectorPayloads(HebiRobotModelPtr robot_model, const double* payloads);

/**
 * \brief Set the mass of payload for a specific end effector in the kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param index The index of the end effector.
 * \param payload The payload mass to set.
 *
 * \returns HebiStatusSuccess on success, HebiStatusArgumentOutOfRange if the
 * index is out of range, HebiStatusInvalidArgument if robot_model is NULL,
 * or if payload is not finite.
 */
HebiStatusCode hebiRobotModelSetEndEffectorPayload(HebiRobotModelPtr robot_model, size_t index, double payload);

/**
 * \brief Get the center of mass of the payload for a specific end effector in
 * the kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param index The index of the end effector.
 * \param com A pointer to an array of 3 doubles where the center of mass will be
 * stored (in SI units of meters).
 *
 * \returns HebiStatusSuccess on success, HebiStatusArgumentOutOfRange if the
 * index is out of range, or HebiStatusInvalidArgument if robot_model or com is
 * NULL.
 */
HebiStatusCode hebiRobotModelGetEndEffectorPayloadCenterOfMass(HebiRobotModelPtr robot_model, size_t index, double* com);

/**
 * \brief Set the center of mass of the payload for a specific end effector in
 * the kinematic tree.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param index The index of the end effector.
 * \param com An array of 3 doubles representing the center of mass (in SI units
 * of meters). Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, HebiStatusArgumentOutOfRange if the
 * index is out of range, or HebiStatusInvalidArgument if robot_model is NULL or
 * com is NULL or if com does not contain finite values.
 */
HebiStatusCode hebiRobotModelSetEndEffectorPayloadCenterOfMass(HebiRobotModelPtr robot_model, size_t index, const double* com);

/**
 * \brief Fill in the 'torques_out' vector with the torques necessary to
 * compensate the static force of gravity on the robot at the particular
 * configuration.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param positions A vector of joint positions/angles (in SI units of meters or
 * radians) equal in length to the number of DoFs of the robot model. Must not
 * be NULL.
 * \param gravity An array of 3 doubles representing the direction and
 * magnitude of gravity (in SI units of meters), in the world frame. Must not
 * be NULL.
 * \param torque_out An allocated array of doubles, with length equal to the
 * return value of hebiRobotModelGetNumberOfDoFs. This is filled in by the
 * function with the required torques/forces for each DoF, in SI units of Nm
 * or N depending on the type of DoF. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model, positions, gravity, or torque_out is NULL.
 */
HebiStatusCode hebiRobotModelGetGravityCompensationTorques(HebiRobotModelPtr model, const double* positions, const double* gravity, double* torque_out);

/**
 * \brief Fill in the 'torques_out' vector with the feed-forward torques
 * necessary to accelerate the masses of the robot components, given the
 * particular state.  The "positions" vector should be filled with data
 * representing the current robot's position (e.g., encoder feedback),
 * whereas the command_positions should be given the commands being sent to
 * the system.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param positions A vector of joint positions/angles (in SI units of meters
 * or radians) equal in length to the number of DoFs of the robot model. Must
 * not be NULL.
 * \param command_positions A vector of commanded joint positions/angles (in
 * SI units of meters or radians) equal in length to the number of DoFs of the
 * robot model. Must not be NULL.
 * \param command_velocities A vector of commanded joint velocities (in SI
 * units of meters or radians per second) equal in length to the number of
 * DoFs of the robot model. Must not be NULL.
 * \param command_accelerations A vector of commanded joint accelerations (in
 * SI units of meters or radians per second squared) equal in length to the
 * number of DoFs of the robot model. Must not be NULL.
 * \param torque_out An allocated array of doubles, with length equal to the
 * return value of hebiRobotModelGetNumberOfDoFs. This is filled in by the
 * function with the required torques/forces for each DoF, in SI units of Nm
 * or N depending on the type of DoF. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model, positions, commanded_positions, commanded_velocities,
 * commanded_accelerations, or torque_out is NULL.
 */
HebiStatusCode hebiRobotModelGetDynamicsCompensationTorques(HebiRobotModelPtr model, const double* positions, const double* command_positions, const double* command_velocities, const double* command_accelerations, double* torque_out);

/**
 * \brief Fill in the masses vector with the mass of each body with mass in the
 * kinematic tree, reported in a depth-first ordering.
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param masses An allocated array of doubles, with length equal to the return
 * value of hebiRobotModelGetNumberOfFrames with argument
 * HebiFrameTypeCenterOfMass. Must not be NULL.
 *
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model or masses is NULL.
 */
HebiStatusCode hebiRobotModelGetMasses(HebiRobotModelPtr robot_model, double* masses);


/**
 * \brief returns table of information about the shape of kinematic tree
 *
 * \param robot_model A valid HEBI RobotModel object.
 * \param frame_type Which type of frame to consider -- see HebiFrameType enum 
 * (index of table corresponds to index of forward kinematic frames of the specified type).
 * HebiFrameTypeMesh and HebiFrameTypePayload and currently unsupported for this operation.
 * \param table An allocated (number of frames for frame_type) array of HebiRobotModelElementTopology objects;
 * this is filled by the function.
 *
 * \returns HebiStatusSuccess on success or HebiStatusInvalidArgument if
 * robot_model or table is NULL or frame_type is unsupported.
 */
HebiStatusCode hebiRobotModelGetTreeTopology(HebiRobotModelPtr robot_model, HebiFrameType frame_type, HebiRobotModelElementTopology* table);

/**
 * \brief returns the maximum speeds for each DoF in the kinematic tree
 * 
 * \param robot_model A valid HEBI RobotModel object.
 * \param max_speeds An allocated array of doubles, with length equal to the
 * return value of hebiRobotModelGetNumberOfDoFs. This is filled in by the
 * function with the maximum speeds for each DoF, in SI units of radians per
 * second or meters per second, depending on the type of DoF. Must not be NULL.
 * 
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model or max_speeds is NULL.
 */
HebiStatusCode hebiRobotModelGetMaxSpeeds(HebiRobotModelPtr robot_model, double* max_speeds);

/**
 * \brief returns the maximum efforts for each DoF in the kinematic tree
 * 
 * \param robot_model A valid HEBI RobotModel object.
 * \param max_efforts An allocated array of doubles, with length equal to the
 * return value of hebiRobotModelGetNumberOfDoFs. This is filled in by the
 * function with the maximum efforts for each DoF, in SI units of Newton-meters
 * or Newtons, depending on the type of DoF. Must not be NULL.
 * 
 * \returns HebiStatusSuccess on success, or HebiStatusInvalidArgument if
 * robot_model or max_efforts is NULL.
 */
HebiStatusCode hebiRobotModelGetMaxEfforts(HebiRobotModelPtr robot_model, double* max_efforts);

/**
 * \brief Frees resources created by this robot model object.
 *
 * RobotModel object should no longer be used after this function is called!
 *
 * \param robot_model A valid HEBI RobotModel object.
 */
void hebiRobotModelRelease(HebiRobotModelPtr robot_model);

////////////////////////////////////////////////////////////////////////////////
/// Inverse Kinematics API
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Creates an IK (inverse kinematics) object that allows for solving for
 * joint angles/positions given objectives and constraints.
 *
 * This optimization is completed using a specified forward kinematics object.
 * The objectives and constraints are stored with this object.
 */
HebiIKPtr hebiIKCreate(void);

/**
 * DEPRECATED: Note that this function can be replaced by using the
 * hebiIKAddObjectiveFramePosition function with a HebiEndEffector frame_type,
 * and is therefore deprecated.  It will be removed in the next major release.
 *
 * \brief Add an objective that optimizes for the end effector output frame
 * origin to be at the given (x, y, z) point.
 *
 * If an end effector position objective already exists, this will replace it.
 *
 * \param weight The weight of this objective relative to any other objective
 * functions (this objective is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param x The desired x position of the end effector frame. 'NaN' can be
 * passed to ignore this variable.
 * \param y The desired y position of the end effector frame. 'NaN' can be
 * passed to ignore this variable.
 * \param z The desired z position of the end effector frame. 'NaN' can be
 * passed to ignore this variable.
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, or all components are set to 'NaN')
 */
HebiStatusCode hebiIKAddObjectiveEndEffectorPosition(HebiIKPtr ik, double weight, size_t end_effector_index, double x,
                                                     double y, double z);

/**
 * \brief Add an objective that optimizes for the origin of a given frame to be
 * at the given (x, y, z) point.
 *
 * If an frame position objective already exists for the given frame type and
 * index, this will replace it.
 *
 * \param weight The weight of this objective relative to any other objective
 * functions (this objective is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param frame_type The frame type of the desired frame.
 * \param frame_index The index of the desired frame, using depth-first
 * traversal of the tree through frames of the given frame type.
 * \param x The desired x position of the end effector frame. 'NaN' can be
 * passed to ignore this variable.
 * \param y The desired y position of the end effector frame. 'NaN' can be
 * passed to ignore this variable.
 * \param z The desired z position of the end effector frame. 'NaN' can be
 * passed to ignore this variable.
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, or all components are set to 'NaN')
 */
HebiStatusCode hebiIKAddObjectiveFramePosition(HebiIKPtr ik, double weight, HebiFrameType frame_type, size_t frame_index,
                                               double x, double y, double z);

/**
 * DEPRECATED: Note that this function can be replaced by using the
 * hebiIKAddObjectiveFrameS03 function with a HebiEndEffector frame_type, and
 * is therefore deprecated.  It will be removed in the next major release.
 *
 * \brief Add an objective that optimizes for the end effector output frame
 * orientation to be given by the 3x3 rotation matrix. Note that this is
 * incompatible with the end effector tip axis objective.
 *
 * If an end effector orientation objective already exists, this will replace
 * it.
 *
 * \param weight The weight of this objective relative to any other objective
 * functions (this objective is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param matrix The desired orientation of the end effector frame, as a 3x3
 * rotation matrix. Must not be NULL.
 * \param ordering How the data in `matrix` should be serialized.
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, or rotation matrix is invalid or null.)
 */
HebiStatusCode hebiIKAddObjectiveEndEffectorSO3(HebiIKPtr ik, double weight, size_t end_effector_index,
                                                const double* matrix, HebiMatrixOrdering ordering);

/**
 * \brief Add an objective that optimizes for the orientation of the indicated
 * frame to be given by the 3x3 rotation matrix. Note that this is
 * incompatible with the frame tip axis objective for the same frame type and
 * index.
 *
 * If an frame tip axis or orientation objective with the same frame type and
 * frame index already exists, this will replace it.
 *
 * \param frame_type The frame type of the desired frame.
 * \param frame_index The index of the desired frame, using depth-first
 * traversal of the tree through frames of the given frame type.
 * \param weight The weight of this objective relative to any other objective
 * functions (this objective is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param matrix The desired orientation of the end effector frame, as a 3x3
 * rotation matrix. Must not be NULL.
 * \param ordering How the data in `matrix` should be serialized.
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, or rotation matrix is invalid or null.)
 */
HebiStatusCode hebiIKAddObjectiveFrameSO3(HebiIKPtr ik, double weight, HebiFrameType frame, size_t frame_index,
                                          const double* matrix, HebiMatrixOrdering ordering);
/**
 * DEPRECATED: Note that this function can be replaced by using the
 * hebiIKAddObjectiveFrameTipAxis function with a HebiEndEffector frame_type,
 * and is therefore deprecated.  It will be removed in the next major release.
 *
 * \brief Add an objective that points the end effector's z axis in a given
 * direction.  Note that this is incompatible with the end effector S03
 * orientation objective.
 *
 * If an end effector orientation objective already exists, this will replace
 * it.
 *
 * \param weight The weight of this objective relative to any other objective
 * functions (this objective is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param x The desired end effector z axis, projected onto the x axis.
 * \param y The desired end effector z axis, projected onto the y axis.
 * \param z The desired end effector z axis, projected onto the z axis.
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, or rotation matrix is invalid.)
 */
HebiStatusCode hebiIKAddObjectiveEndEffectorTipAxis(HebiIKPtr ik, double weight, size_t end_effector_index, double x,
                                                    double y, double z);
/**
 * \brief Add an objective that points the indicated frames's z axis in a given
 * direction.  Note that this is incompatible with the frame S03
 * orientation objective for the same frame type and index.
 *
 * If an frame tip axis or orientation objective with the same frame type and
 * frame index already exists, this will replace it.
 *
 * \param weight The weight of this objective relative to any other objective
 * functions (this objective is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param frame_type The frame type of the desired frame.
 * \param frame_index The index of the desired frame, using depth-first
 * traversal of the tree through frames of the given frame type.
 * \param x The desired end effector z axis, projected onto the x axis.
 * \param y The desired end effector z axis, projected onto the y axis.
 * \param z The desired end effector z axis, projected onto the z axis.
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, tip axis is invalid.)
 */
HebiStatusCode hebiIKAddObjectiveFrameTipAxis(HebiIKPtr ik, double weight, HebiFrameType frame, size_t frame_index,
                                              double x, double y, double z);
/**
 * DEPRECATED: Note that this function can be replaced by using the
 * hebiIKAddConstraintRampedJointAngles function, and is therefore deprecated.
 * It will be removed in the next major release.
 *
 * \brief Define joint angle constraints.
 *
 * NaN or +/- infinity can be set on particular joints to ignore joint limits.
 *
 * BUGFIX NOTE:
 * After v2.17.0, the behavior of this function changes slightly. It now calls
 * hebiIKAddConstraintRampedJointAngles with a "ramp_up_width" of 0.02. Before
 * this, there was an issue where this objective could cause reduced accuracy
 * in other IK functions even when well within the joint limit. Technically
 * this is a functionality change, but it is considered a bugfix instead of a
 * backwards incompatible change as the previous behavior should never be the
 * desired behavior.
 *
 * \param weight The weight of this constraint relative to any other objective
 * functions (this constraint is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param num_joints The number of elements in the min_positions and
 * max_positions arrays.
 * \param min_positions An array with the minimum joint limit for each joint, or
 * NaN or inf if unlimited. Must have num_joints elements, and must not be NULL.
 * \param max_positions An array with the maximum joint limit for each joint, or
 * NaN or inf if unlimited. Must have num_joints elements, and must not be NULL.
 *
 * \return HebiStatusSuccess on success; otherwise a failure code.
 */
HebiStatusCode hebiIKAddConstraintJointAngles(HebiIKPtr ik, double weight, size_t num_joints,
                                              const double* min_positions, const double* max_positions);

/**
 * \brief Define joint angle constraints.
 *
 * NaN or +/- infinity can be set on particular joints to ignore joint limits.
 *
 * "ramp_up_width" should be less than half max_position - min_position for each
 * element of the array, or HebiStatusInvalidArgument will be returned.
 *
 * \param weight The weight of this constraint relative to any other objective
 * functions (this constraint is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param num_joints The number of elements in the min_positions and
 * max_positions arrays.
 * \param min_positions An array with the minimum joint limit for each joint, or
 * NaN or inf if unlimited. Must have num_joints elements, and must not be NULL.
 * \param max_positions An array with the maximum joint limit for each joint, or
 * NaN or inf if unlimited. Must have num_joints elements, and must not be NULL.
 * \param ramp_up_width The distance from the joint provided min and max position
 * which this objective begins to provide pressure. This is uniformly applied;
 * multiple constraints can be added for finer per-joint control.
 * A recommended default value is 0.02 rad (a little over 1 degree), but this can
 * be tweaked as desired. For values between min/max positions further than
 * "ramp_up_width" from the edge this objective has no effect.
 *
 * \return HebiStatusSuccess on success; otherwise a failure code.
 */
HebiStatusCode hebiIKAddConstraintRampedJointAngles(HebiIKPtr ik, double weight, size_t num_joints,
                                                    const double* min_positions, const double* max_positions,
                                                    double ramp_up_width);
/**
 * \brief Add an objective that minimizes rotation about the z axis in an
 * indicated frame, relative to a target angle.  For example, this could
 * be used to indicate that the end effector's z axis should be rotated pi/2
 * radians (90 degrees) about the global z-axis.  This does not enforce rotation
 * about the other axes, meaning that with a 4-DOF planar system that using
 * this as a 1-DOF objective along with a 3-DOF cartesian position objective
 * does not overconstrain the search space, potentially leading to more stable
 * optimization performance.
 *
 * Although rotation about other axes is not enforced by this objective, this
 * does assume the target axis is somewhat aligned with the frame.  If the z
 * axis from the desired frame is more than pi/4 radians (45 degrees) from the
 * target axis the rotation is about, then the objective will smoothly approach
 * the maximum value (pi) over the next pi/8 radians. This avoids objective
 * instability if the target axis and frame axis are close to antipolar, as well
 * as just not well aligned.
 *
 * This could be used along with a tip axis objective as an alternative SO3
 * rotation objective.
 *
 * \param frame_type The frame type of the desired frame.
 * \param frame_index The index of the desired frame, using depth-first
 * traversal of the tree through frames of the given frame type.
 * \param matrix A rotation that transforms the desired frame into world
 * coordinates. The desired frame contains the axis about which the rotation
 * objective is defined as the z axis. This is send as a 3x3 rotation matrix,
 * and must not be NULL
 * \param ordering How the data in `matrix` should be serialized.
 *
 * \param theta The desired rotation about the positive rotation axis, where 0
 * indicates the x and y axes align.  Note that this is technically redundant,
 * as this could be encoded in the rotation matrix, but provides a more
 * convenient interface in some cases (e.g., you just want a simple rotation
 * about the world z axis).
 *
 * \return HebiStatusSuccess on success, otherwise a failure code (e.g. incompatible with
 * existing objectives, or rotation matrix is invalid.)
 */
HebiStatusCode hebiIKAddObjectiveThetaAboutZAxis(HebiIKPtr ik, HebiFrameType frame, size_t frame_index,
                                                 const double* matrix, HebiMatrixOrdering ordering, double theta);

/**
 * \brief Add a custom objective function to be minimized by the IK solver.
 *
 * The given callback is called at each iteration of the local optimization, and
 * is expected to fill in each entry of the "errors" vector.
 *
 * \param weight The weight of this constraint relative to any other objective
 * functions (this constraint is multiplied by this weight before passing to the
 * optimizer). Defaults to 1.0.
 * \param num_errors The number of independent error values that this objective
 * returns.
 * \param err_fnc The callback function which is used to compute the errors. The
 * arguments are:
 *   user_data - The pointer passed in when adding a custom objective; this can
 *     be anything (even NULL), and is designed to allow the user to easily
 *     access information in the callback.
 *   num_positions - the number of elements in the 'positions' array
 *   positions - an array of the joint positions at this point in the
 *     optimization; of length 'num_positions'
 *   errors - an array of error values which must be filled in by the callback;
 *     of length 'num_errors'.
 */
HebiStatusCode hebiIKAddObjectiveCustom(HebiIKPtr ik, double weight, size_t num_errors,
                                        void (*err_fnc)(void* user_data, size_t num_positions, const double* positions,
                                                        double* errors),
                                        void* user_data);

/**
 * \brief Clears the objectives and constraints from this IK object, along
 * with any modifications to the default algorithm parameters.
 */
void hebiIKClearAll(HebiIKPtr ik);

/**
 * \brief Solves for an inverse kinematics solution that moves the end effector
 * to a given point.
 *
 * Note: multiple "hebiIKSolve" calls can be made using the same IK object.
 *
 * \param ik A valid HEBI IK object.
 * \param model A valid HEBI RobotModel object.
 * \param initial_positions The seed positions/angles (in SI units of meters or
 * radians) to start the IK search from; equal in length to the number of DoFs
 * of the kinematic tree. Must not be NULL.
 * \param ik_solution Allocated array of doubles equal in length to the
 * number of DoFs of the kinematic tree; the function will fill in this array
 * with the IK solution (in SI units of meters or radians). Must not be NULL.
 * \param result_info Reserved for future use (will enable more information
 * about output of optimization such as success/failure, function error, etc).
 * This should currently be set to NULL.
 *
 * \return HebiStatusSuccess on success, other values on failure (e.g., no objectives given or
 * dimension mismatch between kinematics object and stored objectives).
 */
HebiStatusCode hebiIKSolve(HebiIKPtr ik, HebiRobotModelPtr model, const double* initial_positions, double* ik_solution,
                           void* result_info);

/**
 * \brief Frees resources created by this inverse kinematics object.
 *
 * IK object should no longer be used after this function is called!
 *
 * \param ik A valid HEBI inverse kinematics object.
 */
void hebiIKRelease(HebiIKPtr ik);

////////////////////////////////////////////////////////////////////////////////
/// Group Trajectory API
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Creates a HebiGroupTrajectory object for a set of joints using the given
 * parameters; this must be released with hebiTrajectoryRelease after use.
 *
 * \param num_joints The number of joints.
 * \param num_waypoints The number of waypoints.
 * \param positions A vector of waypoints for this joint; should be 
 * num_joints rows and num_waypoints columns. Any elements that are NAN will
 * be considered free parameters, and will be set by the function. Values of
 * +/-infinity are not allowed. Must not be NULL.
 * \param velocities An optional vector of velocity constraints at the
 * corresponding waypoints; should either be NULL or num_joints rows and
 * num_waypoints columns. Any elements that are NAN will be considered free
 * parameters, and will be set by the function.  Values of +/-infinity are not
 * allowed. A NULL value represents zero constraints and the start and end, and
 * NAN elsewhere.
 * \param accelerations An optional vector of acceleration constraints at the
 * corresponding waypoints; should either be NULL or num_joints rows and
 * num_waypoints columns. Any elements that are NAN will be considered free
 * parameters, and will be set by the function.  Values of +/-infinity are not
 * allowed. A NULL value represents zero constraints and the start and end, and
 * NAN elsewhere.
 * \param time_vector A vector of times to reach each waypoint; this must
 * be defined (not NULL, and not NAN for any element). The first element must
 * be zero.
 * \param matrix_ordering Select either "row major" or "column major" for
 * serialization order for the positions, velocities, and accelerations
 * matrices.
 *
 * \returns A HebiGroupTrajectory object if there were no errors, and the
 * trajectory has been created. A NULL value indicates that there was an error,
 * but does not specify any details about the error at this time.
 */
HebiGroupTrajectoryPtr hebiGroupTrajectoryCreateUnconstrainedQp(size_t num_joints, size_t num_waypoints,
                                                                const double* positions, const double* velocities,
                                                                const double* accelerations, const double* time_vector,
                                                                HebiMatrixOrdering matrix_ordering);


/**
 * \brief Creates a HebiGroupTrajectory object for a set of joints that moves
 * from a vector of start positions to a vector of end positions using a
 * constant velocity profile with minimum jerk profiles for acceleration and
 * deceleration ramps.
 *
 * This function constructs a trajectory with up to three phases:
 * 1. Ramp-up phase: minimum jerk acceleration from start_velocity to constant
 * velocity
 * 2. Cruise phase: movement at constant velocity
 * 3. Ramp-down phase: minimum jerk deceleration from constant velocity to
 * end_velocity
 *
 * The constant velocity is automatically calculated based on the distance to travel,
 * the duration of the constant velocity phase, and the constraints at the start and
 * end of the trajectory. The direction of velocity is determined by the relative
 * positions of start and end.
 *
 * \param num_joints The number of joints for this group trajectory (and the
 * size of each position/velocity/acceleration vector passed to this function)
 * \param start_positions Vector of starting positions of the trajectory for
 * each joint. All values must be finite.
 * \param end_positions Vector of ending positions of the trajectory for each
 * joint. All values must be finite.
 * \param start_ramp_time The duration of the acceleration ramp at the start of
 * the trajectory. Zero and negative values indicate no ramp-up phase
 * (trajectory starts directly at constant velocity). Must be finite.
 * \param const_speeds The magnitude of the constant velocity (for each joint)
 * to use during the constant velocity phase (must be positive and non-zero).
 * The sign of the velocity will be determined automatically based on the
 * direction from start to end position.  These speeds are used as "maximum"
 * per-joint speeds to determine the length of the constant velocity trajectory
 * section.  Some joints may move slower than this rate during the constant
 * velocity section.
 * \param end_ramp_time The duration of the deceleration ramp at the end of the
 * trajectory. Must be non-negative and finite.
 * \param start_velocities Vector of velocities at the beginning of the
 * trajectory. Only used when start_ramp_time is positive (ramp-up phase
 * exists). When starting directly in the constant velocity phase
 * (start_ramp_time <= 0), this parameter is ignored and the constant velocity
 * is used instead. All values must be finite.
 * \param end_velocities Vector of velocities at the end of the trajectory. All
 * values must be finite.
 * \param start_accelerations Vector of accelerations at the beginning of the
 * trajectory. Only used when start_ramp_time is positive (ramp-up phase
 * exists). When starting directly in the constant velocity phase
 * (start_ramp_time <= 0), this parameter is ignored and zero acceleration is
 * used instead. All values must be finite.
 * \param end_accelerations Vector of accelerations at the end of the
 * trajectory. All values must be finite.
 *
 * \returns A HebiGroupTrajectory object if successful. A NULL value indicates
 * an error due to invalid input parameters (non-finite values or negative time
 * values or 0 joints). The returned trajectory must be released with
 * hebiGroupTrajectoryRelease() after use.
 */
HebiGroupTrajectoryPtr hebiGroupTrajectoryCreateConstantVelocity(size_t num_joints, double* start_positions,
                                                                 double* end_positions, double* const_speeds,
                                                                 double start_ramp_time, double end_ramp_time,
                                                                 double* start_velocities, double* end_velocities,
                                                                 double* start_accelerations, double* end_accelerations);

/**
 * \brief Frees resources created by this trajectory.
 *
 * GroupTrajectory should no longer be used after this function is called!
 */
void hebiGroupTrajectoryRelease(HebiGroupTrajectoryPtr trajectory);

/**
 * \brief Returns the length of this trajectory (in seconds).
 */
double hebiGroupTrajectoryGetDuration(HebiGroupTrajectoryPtr trajectory);

/**
 * \brief Gets the value of the trajectory at a given time.
 *
 * \param trajectory A HebiGroupTrajectory object
 * \param time The time within the trajectory (from the beginning to the end of
 * the trajectory's time vector) at which to query.
 * \param positions Allocated vector of doubles equal to the number of joints
 * in this trajectory. Filled in with the positions at the given time, as
 * defined by this trajectory. Must not be null.
 * \param velocities Allocated vector of doubles equal to the number of joints
 * in this trajectory. Filled in with the velocities at the given time, as
 * defined by this trajectory. Must not be null.
 * \param accelerations Allocated vector of doubles equal to the number of joints
 * in this trajectory. Filled in with the accelerations at the given time, as
 * defined by this trajectory. Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiGroupTrajectoryGetState(HebiGroupTrajectoryPtr trajectory, double time, double* positions,
                                           double* velocities, double* accelerations);

/**
 * \brief Gets the minimum and maximum position values for a group trajectory.
 *
 * \param trajectory A HebiGroupTrajectory object.
 * \param minimums Allocated vector of doubles with length equal to the number
 * of joints in this trajectory. Filled in with the minimum position values of
 * the trajectory. Must not be null.
 * \param maximums Allocated vector of doubles with length equal to the number
 * of joints in this trajectory. Filled in with the maximum position values of
 * the trajectory. Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiGroupTrajectoryGetMinMaxPosition(HebiGroupTrajectoryPtr trajectory, double* minimums, double* maximums);

/**
 * \brief Gets the maximum absolute velocities for each joint in a trajectory.
 *
 * \param trajectory A HebiGroupTrajectory object.
 * \param maximums Allocated vector of doubles with length equal to the number
 * of joints in this trajectory. Filled in with the maximum absolute velocity
 * values of the trajectory for each joint. Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiGroupTrajectoryGetMaxVelocity(HebiGroupTrajectoryPtr trajectory, double* maximums);

/**
 * \brief Gets the maximum absolute accelerations for each joint in a
 * trajectory.
 *
 * \param trajectory A HebiGroupTrajectory object.
 * \param maximums Allocated vector of doubles with length equal to the number
 * of joints in this trajectory. Filled in with the maximum absolute
 * acceleration values of the trajectory for each joint. Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiGroupTrajectoryGetMaxAcceleration(HebiGroupTrajectoryPtr trajectory, double* maximums);

/**
 * \brief Attempts to rescale the trajectory to be within the provided velocity
 * and acceleration limits. Fixed position, velocity, and acceleration waypoints
 * used to generate the trajectory will be maintained. If these waypoints are
 * above the limits provided to this function, them waypoints will be cropped to
 * the maximums provided.
 *
 * Note that this uses a heuristic to rescale, and will not precisely match the
 * provided limits.
 *
 * Also note that the trajectory may be slowed to be within these limits, but is
 * never sped up.
 *
 * \param trajectory A HebiGroupTrajectory object.
 * \param velocity_limits Vector of doubles with length equal to the number
 * of joints in this trajectory. Values represent the maximum allowed velocity
 * for the joint at that index. If null, not used to scale trajectory.
 * \param acceleration_limits Vector of doubles with length equal to the number
 * of joints in this trajectory. Values represent the maximum allowed
 * acceleration for the joint at that index. If null, not used to scale
 * trajectory.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiGroupTrajectoryRescaleContinuousToLimits(HebiGroupTrajectoryPtr trajectory,
                                                            double* velocity_limits, double* acceleration_limits);

/**
 * \brief Rescales a trajectory by a time factor.
 *
 * Values > 1 slow down the trajectory (increase duration), values < 1 speed up
 * the trajectory (decrease duration). The start time remains unchanged, and all
 * subsequent waypoint times are scaled relative to the start time. All
 * specified waypoints constraints remain unchanged, so the rescale operation is
 * "continuous" with previous motions that were used to specify start velocity
 * or acceleration constraints.
 *
 * \param trajectory A HebiGroupTrajectory object to rescale.
 * \param scale Time scale factor. Must be positive (> 0).
 *
 * \returns HebiStatusSuccess if rescaling was successful,
 * HebiStatusInvalidArgument if the scale factor is invalid (<= 0) or trajectory
 * is null, and HebiStatusFailure on any other internal error.
 */
HebiStatusCode hebiGroupTrajectoryRescaleContinuous(HebiGroupTrajectoryPtr trajectory, double scale_factor);

////////////////////////////////////////////////////////////////////////////////
/// Trajectory API (deprecated in favor of GroupTrajectory API)
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Creates a HebiTrajectory object for a single joint using the given
 * parameters; this must be released with hebiTrajectoryRelease after use.
 *
 * \param num_waypoints The number of waypoints.
 * \param positions A vector of waypoints for this joint; should be
 * num_waypoints in length. Any elements that are NAN will be considered free
 * parameters, and will be set by the function. Values of +/-infinity are not
 * allowed. Must not be NULL.
 * \param velocities An optional vector of velocity constraints at the
 * corresponding waypoints; should either be NULL or num_waypoints in length.
 * Any elements that are NAN will be considered free parameters, and will be set
 * by the function.  Values of +/-infinity are not allowed. A NULL value
 * represents zero constraints and the start and end, and NAN elsewhere.
 * \param accelerations An optional vector of acceleration constraints at the
 * corresponding waypoints; should either be NULL or num_waypoints in length.
 * Any elements that are NAN will be considered free parameters, and will be set
 * by the function.  Values of +/-infinity are not allowed. A NULL value
 * represents zero constraints and the start and end, and NAN elsewhere.
 * \param time_vector A vector of times to reach each waypoint; this must
 * be defined (not NULL, and not NAN for any element). The first element must
 * be zero.
 *
 * \returns A HebiTrajectory object if there were no errors, and the trajectory
 * has been created. A NULL value indicates that there was an error, but does
 * not specify any details about the error at this time.
 */
HebiTrajectoryPtr hebiTrajectoryCreateUnconstrainedQp(size_t num_waypoints, const double* positions,
                                                      const double* velocities, const double* accelerations,
                                                      const double* time_vector);
/**
 * \brief Frees resources created by this trajectory.
 *
 * Trajectory should no longer be used after this function is called!
 */
void hebiTrajectoryRelease(HebiTrajectoryPtr trajectory);

/**
 * \brief Returns the length of this trajectory (in seconds).
 */
double hebiTrajectoryGetDuration(HebiTrajectoryPtr trajectory);

/**
 * \brief Gets the value of the trajectory at a given time.
 *
 * \param trajectory A HebiTrajectory object
 * \param time The time within the trajectory (from the beginning to the end of
 * the trajectory's time vector) at which to query.
 * \param position Filled in with the position at the given time, as defined by
 * this trajectory. Must not be null.
 * \param velocity Filled in with the velocity at the given time, as defined by
 * this trajectory. Must not be null.
 * \param acceleration Filled in with the acceleration at the given time, as
 * defined by this trajectory. Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiTrajectoryGetState(HebiTrajectoryPtr trajectory, double time, double* position, double* velocity,
                                      double* acceleration);

/**
 * \brief Estimates the time required to move between two waypoints of joint
 * positions, given maximum velocity and acceleration constraints.
 * The time for each segment is determined by the joint that requires the
 * longest time to complete the movement (bottleneck joint).
 *
 * \param positions A flattened vector of joint positions stored in row-major order.
 * Length should be num_joints * num_waypoints. Must be contiguous in memory.
 * \param max_velocities A vector of maximum velocities equal in length to the
 * number of joints. Must not be null.
 * \param max_accelerations A vector of maximum accelerations equal in length
 * to the number of joints. Must not be null.
 * \param num_joints The number of joints in this trajectory (rows in positions matrix).
 * \param num_waypoints The number of waypoints in this trajectory (columns in
 * positions matrix).
 * \param segment_times An allocated array of doubles equal in length to the
 * number of segments in this trajectory; the function will fill in this array
 * with the time required for each segment. Must not be null.
 * \param minimum_segment_time Minimum allowed segment duration. Any estimated time
 * below this value will be clipped. Must be a finite non-negative value.
 * \param params Reference to the HebiTimeEstimationParams object specifying the method
 * and parameters for time estimation based on the method chosen.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiEstimateSegmentTimes(const double* positions, const double* max_velocities,
                                        const double* max_accelerations, size_t num_joints,
                                        size_t num_waypoints, double* segment_times,
                                        double minimum_segment_time,
                                        const HebiTimeEstimationParams* params);

/**
 * \brief Gets the minimum and maximum position values for a trajectory.
 * 
 * \param trajectory A HebiTrajectory object.
 * \param minimum Filled in with the minimum position value of the trajectory.
 * Must not be null.
 * \param maximum Filled in with the maximum position value of the trajectory.
 * Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiTrajectoryGetMinMaxPosition(HebiTrajectoryPtr trajectory, double* minimum, double* maximum);

/**
 * \brief Gets the maximum absolute velocity value for a trajectory.
 * 
 * \param trajectory A HebiTrajectory object.
 * \param maximum Filled in with the maximum absolute velocity value of the trajectory.
 * Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiTrajectoryGetMaxVelocity(HebiTrajectoryPtr trajectory, double* maximum);

/**
 * \brief Gets the maximum absolute acceleration value for a trajectory.
 * 
 * \param trajectory A HebiTrajectory object.
 * \param maximum Filled in with the maximum absolute acceleration value of the trajectory.
 * Must not be null.
 *
 * \returns HebiStatusSuccess on success, otherwise an error status.
 */
HebiStatusCode hebiTrajectoryGetMaxAcceleration(HebiTrajectoryPtr trajectory, double* maximum);

/**
 * \brief Rescales a trajectory by a time factor.
 * 
 * Values > 1 slow down the trajectory (increase duration), values < 1 speed up
 * the trajectory (decrease duration). The start time remains unchanged, and all
 * subsequent waypoint times are scaled relative to the start time. The position
 * waypoints remain unchanged, but velocities and accelerations are scaled inversely.
 * 
 * \param trajectory A HebiTrajectory object to rescale.
 * \param scale Time scale factor. Must be positive (> 0).
 *
 * \returns HebiStatusSuccess if rescaling was successful, HebiStatusInvalidArgument
 * if the scale factor is invalid (<= 0) or trajectory is null.
 */
HebiStatusCode hebiTrajectoryRescale(HebiTrajectoryPtr trajectory, double scale);

/**
 * \brief Calculates the constant velocity phase time required to move from a start
 * position to an end position using a constant velocity profile with minimum jerk
 * profiles for acceleration and deceleration ramps.
 *
 * \param start_position The starting position of the trajectory. Must be finite.
 * \param end_position The ending position of the trajectory. Must be finite.
 * \param const_speed The magnitude of the constant velocity to use during the
 * constant velocity phase (must be positive and non-zero). The sign of the velocity
 * will be determined automatically based on the direction from start to end position.
 * \param start_ramp_time The duration of the acceleration ramp at the start of the
 * trajectory. Zero and negative values indicate no ramp-up phase (trajectory starts
 * directly at constant velocity).
 * \param end_ramp_time The duration of the deceleration ramp at the end of the
 * trajectory. Must be positive. This phase is always required.
 * \param start_velocity Velocity at the beginning of the trajectory. Must be finite.
 * \param end_velocity Velocity at the end of the trajectory. Must be finite.
 * \param start_acceleration Acceleration at the beginning of the trajectory. Must be finite.
 * \param end_acceleration Acceleration at the end of the trajectory. Must be finite.
 *
 * \returns The constant velocity phase time (in seconds) required for the constant velocity segment.
 * - Positive value: duration of the constant velocity phase
 * - Zero: insufficient distance to reach the specified constant speed with the given
 *   ramp times (the trajectory would only consist of ramp phases)
 * - Negative value (-1.0): invalid input parameters (non-finite values, non-positive
 *   end_ramp_time, or non-positive const_speed)
 */
double hebiTrajectoryGetConstantVelocitySegmentTime(double start_position, double end_position, double const_speed,
                                                    double start_ramp_time, double end_ramp_time,
                                                    double start_velocity, double end_velocity,
                                                    double start_acceleration, double end_acceleration);

/**
 * \brief Creates a HebiTrajectory object for a single joint that moves from a
 * start position to an end position using a constant velocity profile with
 * minimum jerk profiles for acceleration and deceleration ramps.
 * 
 * This function constructs a trajectory with up to three phases:
 * 1. Ramp-up phase: minimum jerk acceleration from start_velocity to constant velocity
 * 2. Cruise phase: movement at constant velocity
 * 3. Ramp-down phase: minimum jerk deceleration from constant velocity to end_velocity
 * 
 * The constant velocity is automatically calculated based on the distance to travel,
 * the duration of the constant velocity phase, and the constraints at the start and
 * end of the trajectory. The direction of velocity is determined by the relative
 * positions of start and end.
 * 
 * \param start_position The starting position of the trajectory. Must be finite.
 * \param end_position The ending position of the trajectory. Must be finite.
 * \param start_ramp_time The duration of the acceleration ramp at the start of the
 * trajectory. Zero and negative values indicate no ramp-up phase (trajectory starts
 * directly at constant velocity). Must be finite.
 * \param const_velocity_time The duration of the constant velocity portion of the
 * trajectory. Zero indicates no constant velocity portion (trajectory consists only
 * of ramp phases). Must be non-negative and finite.
 * Use hebiTrajectoryGetConstantVelocitySegmentTime() to calculate this value for a
 * desired constant speed.
 * \param end_ramp_time The duration of the deceleration ramp at the end of the
 * trajectory. Must be non-negative and finite.
 * \param start_velocity Velocity at the beginning of the trajectory.
 * Only used when start_ramp_time is positive (ramp-up phase exists). When starting
 * directly in the constant velocity phase (start_ramp_time <= 0), this parameter is
 * ignored and the constant velocity is used instead. Must be finite.
 * \param end_velocity Velocity at the end of the trajectory. Must be finite.
 * \param start_acceleration Acceleration at the beginning of the trajectory.
 * Only used when start_ramp_time is positive (ramp-up phase exists).
 * When starting directly in the constant velocity phase (start_ramp_time <= 0),
 * this parameter is ignored and zero acceleration is used instead. Must be finite.
 * \param end_acceleration Acceleration at the end of the trajectory. Must be finite.
 * 
 * \returns A HebiTrajectory object if successful. A NULL value indicates an error
 * due to invalid input parameters (non-finite values or negative time values).
 * The returned trajectory must be released with hebiTrajectoryRelease() after use.
 */
HebiTrajectoryPtr hebiTrajectoryCreateConstantVelocity(double start_position, double end_position,
                                                       double start_ramp_time, double const_velocity_time, double end_ramp_time,
                                                       double start_velocity, double end_velocity,
                                                       double start_acceleration, double end_acceleration);

////////////////////////////////////////////////////////////////////////////////
/// Logging API
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Releases a log file instance
 */
void hebiLogFileRelease(HebiLogFilePtr log_file);

/**
 * \brief Copy the path and name of the log file into a buffer.
 *
 * To only query the length of the string, provide a null pointer for the buffer parameter.
 * If the provided buffer is not large enough to hold the string (the length determined by the length parameter),
 * the call will fail. Note that the size of this buffer includes the null
 * terminating character.
 *
 * \param buffer Pointer to a buffer into which the string will be written. This can be null, in which case this
 * function will write the size of the string (including null character) into length.
 * \param length Pointer to the length of the input buffer. This parameter must not be null, or this function
 * will return HebiStatusInvalidArgument
 * \return HebiStatusSuccess on success, HebiStatusBufferTooSmall if the value referenced by length is smaller than
 *         the string (including the character), or HebiStatusInvalidArgument if length pointer is null
 */
HebiStatusCode hebiLogFileGetFileName(HebiLogFilePtr log_file, char* buffer, size_t* length);

/**
 * \brief Opens an existing log file
 *
 * Note: It is up to the user to check if the returned pointer is null. If the file does not exist,
 * or if the file is not a valid log file, this function returns null.
 *
 * If this function returns a pointer, you must call @c hebiLogFileRelease(HebiLogFilePtr)
 * to release the allocated memory.
 *
 * \param file the directory and path of the file to open.  Must not be NULL.
 * \return a pointer to the file;  null if the file could not be opened
 */
HebiLogFilePtr hebiLogFileOpen(const char* file);

/**
 * \brief Retrieve the number of modules in the group represented by an opened log file
 *
 * \return The number of modules in the group
 */
size_t hebiLogFileGetNumberOfModules(HebiLogFilePtr log_file);

/**
 * \brief Retrieve the next group feedback from the opened log file
 *
 * \param feedback the feedback object into which the contents will be copied. If this does not
 * match the size of the log an error is returned.
 * \return HebiStatusSuccess on successful return of feedback.
 * HebiStatusInvalidArgument indicates either `log_file` or `feedback` is null.
 * HebiStatusFailure indicates that end of file has been reached before encountering another Feedback entry,
 * that there was an error reading the log file (e.g., log file corruption), or the GroupFeedback does not
 * match the number of modules in the log file.
 */
HebiStatusCode hebiLogFileGetNextFeedback(HebiLogFilePtr log_file, HebiGroupFeedbackPtr feedback);

/**
 * \brief Retrieve the next group item from the opened log file
 *
 * \param entry_type_out a non-null pointer which is set to the type of entry found
 * \param timestamp_out a non-null pointer which is set to the timestamp for this entry
 * \param feedback the feedback object into which the contents will be copied; may be null to ignore feedback entries
 * \param info the info object into which the contents will be copied; may be null to ignore info entries
 * \param user_state the user state object into which the contents will be copied; may be null to ignore user state entries
 * \return HebiStatusSuccess on successful return of feedback, info, or user_state.
 * HebiStatusInvalidArgument indicates either `log_file`, `entry_type_out`, or `timestamp_out` is null, or all of 
 * `feedback`, `info`, and `user_state` are null.
 * HebiStatusFailure indicates that end of file has been reached before encountering another specified entry,
 * that there was an error reading the log file (e.g., log file corruption), or the GroupFeedback or GroupInfo does
 * not match the number of modules in the log file.
 */
HebiStatusCode hebiLogFileGetNextEntry(HebiLogFilePtr ptr, HebiLogFileEntryType* entry_type_out, uint64_t* timestamp_out,
                                       HebiGroupFeedbackPtr feedback, HebiGroupInfoPtr info, HebiUserState* user_state);

////////////////////////////////////////////////////////////////////////////////
/// String Functions
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Copy the string into a buffer
 *
 * To only query the length of the string, provide a null pointer for the buffer parameter.
 * If the provided buffer is not large enough to hold the string (the length determined by the length parameter),
 * the call will fail. Note that the size of this buffer includes the null terminating character.
 *
 * \param buffer Pointer to a buffer into which the string will be written. This can be null, in which case this
 * function will write the size of the string (including null character) into length.
 * \param length Pointer to the length of the input buffer. This parameter must not be null, or this function
 * will return HebiStatusInvalidArgument
 * \return HebiStatusSuccess on success, HebiStatusBufferTooSmall if the value referenced by length is smaller than
 * the string (including the character), or HebiStatusInvalidArgument if length pointer or HebiStringPtr argument
 * is null
 */
HebiStatusCode hebiStringGetString(HebiStringPtr str, char* buffer, size_t* length);

/**
 * \brief Releases a string instance
 */
void hebiStringRelease(HebiStringPtr str);

////////////////////////////////////////////////////////////////////////////////
/// Misc Functions
////////////////////////////////////////////////////////////////////////////////

/**
 * \brief Get the string corresponding to the last error from any safety parameters function.
 * 
 * Note: This function returns the last error from the current thread.
 * 
 * \return a NULL terminated string which must not be deallocated
 */
const char* hebiSafetyParametersGetLastError(void);

/**
 * \brief Get the version of the library
 *
 * All parameters must not be NULL.
 *
 * \return HebiStatusSuccess on success, otherwise HebiStatusInvalidArgument if
 * a parameter is NULL.
 */
HebiStatusCode hebiGetLibraryVersion(int32_t* major, int32_t* minor, int32_t* revision);

/**
 * \brief Get the build number version of the library.
 *
 * \return 0 for a release build of the library, or the nightly dev build number otherwise.
 */
int32_t hebiGetLibraryVersionBuild();

/**
 * \brief Frees all resources created by the library.  Note: any calls to the
 * HEBI library functions after this will result in undefined behavior!
 */
void hebiCleanup(void);

#ifdef __cplusplus
} // extern "C"
#endif
